Using the solid booster gas for spooling the turbine now that is
interesting!
Too bad I missed out on this one
http://www.bonhams.com/auctions/21906/lot/207/
Ok still looking for seal suggestions
Russel mentioned a lip and piston on the back side using a pressure
channel to maintain balance.
-------- Original Message --------
Subject: [AR] Re: Arocket Pump Progress
From: "Anthony Cesaroni" <acesaroni@xxxxxxxxxxx>
Date: Tue, July 14, 2015 2:36 pm
To: <arocket@xxxxxxxxxxxxx>
Note the insulated pipe on the left hand side of pump. It’s a gas bleed from
the first stage solid propellant booster used to spool the turbine up. All
the valves including that one are pyrotechnically operated. The next valve to
open is the starter hypergol bottle at the top right. The vessel and feed
pipe to left of it is the regeneratively cooled gas generator. Perhaps if
Alexander can translate the legend on the drawing, it may be helpful for
those participating.
Best.
Anthony J. Cesaroni
President/CEO
Cesaroni Technology/Cesaroni Aerospace
<http://www.cesaronitech.com/> http://www.cesaronitech.com/
(941) 360-3100 x101 Sarasota
(905) 887-2370 x222 Toronto
From: arocket-bounce@xxxxxxxxxxxxx [mailto:arocket-bounce@xxxxxxxxxxxxx] On
Behalf Of Alexander Ponomarenko
Sent: Tuesday, July 14, 2015 3:57 PM
To: arocket@xxxxxxxxxxxxx
Subject: [AR] Re: Arocket Pump Progress
In case you cannot see attached image:
http://lpre.de/upload/MC-1_1.jpg
On 07/14/2015 09:43 PM, Alexander Ponomarenko wrote:
MC-1 TP: [attached]
