[argyllcms] Re: Strip read failed due to communication problem (i1pro W7x64)
- From: "M. Kupiec" <markupiec@xxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Fri, 15 Jul 2011 16:50:56 +0200
HURAAAA! SOLVED
New 4$ usb PCI card solved my problem with i1pro without need of any
software modification
As i suspect USB Voltage stabilizers or P67 compatibility was the problem.
Thanks anyone 4 help. ;-)
2011/7/15 Alan Goldhammer <agoldhammer@xxxxxxxxxxx>
> That can happen. I have two sets of USB ports on my computer and the i1
> pro only works on one of them. I attribute this to the problem you
> describe. It is device dependent as the USB ports that it does not work on
> seem fine for other devices (including ColorMunki).****
>
> ** **
>
> Alan****
>
> ** **
>
> *From:* argyllcms-bounce@xxxxxxxxxxxxx [mailto:
> argyllcms-bounce@xxxxxxxxxxxxx] *On Behalf Of *M. Kupiec
> *Sent:* Friday, July 15, 2011 7:51 AM
> *To:* argyllcms@xxxxxxxxxxxxx
> *Subject:* [argyllcms] Re: Strip read failed due to communication problem
> (i1pro W7x64)****
>
> ** **
>
> I'm wondering if the problem is not in not enough usb power while
> measuring.
> I've made some measurements and there in 4,95V in pc and 5,10V in working
> laptop
> Seems normal but thats idle voltages
>
> At evening im gona to try with powered USB hub, and additional usb pci
> card.
>
> Pozdrawiam Marcin
>
>
>
> ****
>
--
Pozdrawiam
Marcin
Other related posts:
