[argyllcms] Re: Loading CAL file with dispwin
- From: Roger Breton <graxx@xxxxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Sun, 10 Feb 2008 20:10:19 -0500
Got BETA 8 and it works!!!
> dispwin -V myProfile.icm
> Verify: 'myProfile.icm' IS loaded (discrepancy 0.0%)
So this means that the LUT currently loaded in video RAM is no different to
the VCGT tag found inside myProfile.icm, right?
So, if the two are the same, that means that the monitor is under Argyll's
calibration control, and that whathever ICC profile done under that
particular calibration is valid, right?
I could kiss you, Graeme!
Last (but not least). Any reason for the ICM file extension? As opposed to
ICC?
Roger Breton
Other related posts:
