[amayausers] Re: needles and thread breaks on nylon jacket
- From: "Ed Orantes" <e3m@xxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Tue, 20 Dec 2005 09:38:55 -0600
Barbara,
Are you increasing your material thickness to accommodate for the added
fabric?
Ed
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx]On Behalf Of Avalon Embroidery
Sent: Thursday, December 15, 2005 12:19 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] needles and thread breaks on nylon jacket
Well...on going saga, but different twist...
we checked the needle plate, check the hook and cleaned everything out.
Here is what is happening now...I can run through the lettering without
any thread breaks (or needle breaks) with backing only on a test sew out.
Sews out beautifully. When I put a piece of the fabric on (100% nylon) and
try to sew out the lettering I get thread breaks.
I am using a 70/10 sharp titanium needle with regular cut away backing.
Can anyone tell me what you use as far as needle and backing on nylon
jackets?
Thanks
Barbara
Avalon Embroidery
Other related posts:
