Ron, What presser foot setting do you think? Cheryl Rotter Team Sports Ink 5111 Grumann Dr. Ste #1B Carson City, NV 89706 775-884-3550 -----Original Message----- From: amayausers-bounce@xxxxxxxxxxxxx [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Body Cover Sent: Thursday, May 18, 2006 10:24 AM To: amayausers@xxxxxxxxxxxxx Subject: [amayausers] Re: Presser foot adjustment YES! the little spring won't push down on the thread like it used to or in our case you drop it and it looks fine but you later realize it's out of round and the bobbin slightly rubs on one side creating all these weird tension variations. I think they are like $6 so we changed all 4 of ours out and was amazed how much better they worked, I think when we clean underneath the spring (flat thin metal band) they relax and don't keep consistent tension. Ron Vinyard Body Cover / Magic Stitches 1-888-435-0176 541-471-1504 Fax 541-471-0427 420 SW H Street, Grants Pass, OR 97526-2532 info@xxxxxxxxxxxxxxxxxxx www.bodycoverdesign.com ----- Original Message ----- From: "Cheryl Rotter" <tsiemb@xxxxxxxxxxxxx> To: <amayausers@xxxxxxxxxxxxx> Sent: Thursday, May 18, 2006 10:18 AM Subject: [amayausers] Re: Presser foot adjustment > Ron, > Do bobbin cases wear out? > > Cheryl Rotter > Team Sports Ink > 5111 Grumann Dr. Ste #1B > Carson City, NV 89706 > 775-884-3550 > > > -----Original Message----- > From: amayausers-bounce@xxxxxxxxxxxxx > [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Body Cover > Sent: Thursday, May 18, 2006 9:56 AM > To: amayausers@xxxxxxxxxxxxx > Subject: [amayausers] Re: Presser foot adjustment > > Sounds like a bobbin loosening up to me. > You might try switching bobbin cases from a good machine > to a bad one and see if the problem goes away. > > Just a thought. > > Ron Vinyard > Body Cover / Magic Stitches > > 1-888-435-0176 > 541-471-1504 Fax 541-471-0427 > > 420 SW H Street, Grants Pass, OR 97526-2532 > > info@xxxxxxxxxxxxxxxxxxx > www.bodycoverdesign.com > > ----- Original Message ----- > From: "Cheryl Rotter" <tsiemb@xxxxxxxxxxxxx> > To: <amayausers@xxxxxxxxxxxxx> > Sent: Thursday, May 18, 2006 9:45 AM > Subject: [amayausers] Presser foot adjustment > > >>I need some advice. I am sewing a tech jacket (it looks like a knit but >> it isn't very stretchy, it might have neoprene underneath) from Ash > City >> that has no nap on the top but has a light microfleece lining inside. > I >> am sewing a jacket back with metallic thread from ARC. One piece of >> heavy cutaway, 75/11 sharp needle. The stitches are all satin stitches >> with density of 4.0 and a zigzag underlay. I digitized this myself > using >> the "convert to stitches" feature using a clean vector file from Corel >> Draw. Most of them have sewn ok, but I have had about 5 of the 34 > sewing >> with loopy and loose stitches. From the back the bobbin looks too > tight. >> I first took off Actifed and went to a 7 material thickness, worked > for >> a while then loops started again. About two machines are sewing the > file >> great, the other 5 machines, not so great. I can't figure out why the >> two are sewing so nicely. All settings seem to be the same with these >> two and the other 5 >> >> What presser foot setting would you sew? How about bobbin tension? > The >> reason I turned off actifeed was that one of my new 2005 XTs was > sewing >> the metallic thread at a 2. That did not seem right. Any help is >> appreciated. >> >> cr >> >> Cheryl Rotter >> Team Sports Ink >> 5111 Grumann Dr. Ste #1B >> Carson City, NV 89706 >> 775-884-3550 >> >> >> =========================================================== >> >> The AmayaUsers Mailing List >> Website: http://www.amayausers.com >> Discussion Board: http://www.amayausers.com/boards >> Subscribe/Unsubscribe: http://www.amayausers.com/list >> >> =========================================================== >> >> > > =========================================================== > > The AmayaUsers Mailing List > Website: http://www.amayausers.com > Discussion Board: http://www.amayausers.com/boards > Subscribe/Unsubscribe: http://www.amayausers.com/list > > =========================================================== > > =========================================================== > > The AmayaUsers Mailing List > Website: http://www.amayausers.com > Discussion Board: http://www.amayausers.com/boards > Subscribe/Unsubscribe: http://www.amayausers.com/list > > =========================================================== > > =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list =========================================================== =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================