Hi all, I've been working with the new OS (v.7.00.018). I have a few issues that I'd like some help with: 1. The acti-feed system seems to be working most of the time but every once in awhile it gets stuck on 1 or 2 and of course ends up causing a thread break. I usually end up switching to standard with a decent setting but I'd like to figure out why. It affects different needles. I've made no adjustments to the bobbin (I also installed the new rollers). Any ideas? 2. I can no longer press the DS button that used to allow me to move different objects around (lettering, design). This used to be really handy if I just needed to move the lettering down a bit closer to the design. [I don't have any version of DS but I could still do some manipulating through the OS.] 3. Is there a way to change the background color in the control panel view? I used to be able to change it to a thread color but I can't seem to anymore. This was really handy for white thread designs. [I think this disappeared at the previous upgrade.] 4. I used to be able to press and hold the green button and as long as I held the button, the machine would step through the stitches (like when just beginning a new color to set the thread). [I think this also disappeared at the previous upgrade.] 5. I am also having to attempt to load a design more than once as it frequently hangs up in sending the design to the machine (Design download denied). This used to happen only rarely and is now happening quite often. Any ideas? Now for a hoop idea. I purchased the 43cm by 50cm hoop thinking the sewing field would be longer but only to find it has the same sewing field as the 43cm by 43cm. Anyway, rather than return it and buy another 43 x 43 hoop (not worth the shipping and I really want the bigger sewing field), I have an idea. Does anyone have a broken wooden emt/amaya hoop they no longer want? I'd like to see if I could attach a second set of mounting brackets in the reverse direction so I could just turn the garment around and sew the bottom (now the top) without re-hooping. Do you think it would work? Right now the mounting brackets are not centered but set towards the top of the hoop, so if I place the second set in the opposite direction but at the same distance I could expand my sewing field with only having to reverse the garment on the machine. What do you think? That's it for now. Thanks for any and all advice. Dorothy Compton Bee Embroidered _www.BeeEmbroidered.com_ (http://www.beeembroidered.com/) (916) 635-7467 Rancho Cordova, CA