Yes, I leave my Dakata CD in all the time and load from it. Please let me know when the fix is available. Thank you. Tom L. Creative Promotions ----- Original Message ----- From: "Jeff Banks" <banksje@xxxxxxxxxxx> To: <amayausers@xxxxxxxxxxxxx> Sent: Friday, May 12, 2006 3:47 PM Subject: [amayausers] Re: Loading Designs > Tom, > > A question, are you opening the design from a CD or? It should fail with a > message "Failed to Save Document" when opened from a CD? > > There is a "bug" in the Send to Machine function of the 7.00.018 software. > The software is saving the file but to the existing file that was opened. > It > should be saving it to a Temp Folder and then sending it. It was found and > is fixed in the Beta software currently being tested for release in a few > weeks. Remind me and I will insure you are sent one of the first copies > after its is released to the public. > > Jeff Banks > Melco Embroidery Systems > > > ----- Original Message ----- > From: "Tom Ladow" <tcladow@xxxxxxxxxxxxxxxxxxxxxxxxxx> > To: <amayausers@xxxxxxxxxxxxx> > Sent: Friday, May 12, 2006 12:36 PM > Subject: [amayausers] Loading Designs > > >> >> I have a new quirk since upgrading the DS pro Plus software 7.00.018. >> Now >> when I load a Dakota Design in DS and send it to Amaya (Load Design) it >> now >> makes me save the design with a file name before it will load it to Amaya >> OS. I did not have to do this with previous edition of DS. Is this a >> new >> thing? It is a bit of a pain to have to name and save a design that I >> only >> will need one time. I normally save the file to my desktop then go back >> and >> delete it, but I am not sure why the new upgrade requires me to do this >> each time I use a Dakota design? >> >> Tom L. >> Creative Promotions >> >> >> > >