This message was posted by Big Dog on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/1081.html#000014 My turn! I just recently completed the 4,000,000 maintanence step and all was fine until today. One false bobbin break after another. I'm on the last job of the day and hopefully after a rest this will stop. I've changed bobbins, bobbin cases, a needle, presser foot setting, slower speed, faster speed. I'm stitching the design on sweatshirt fleece with the setting of 11 using a meduim weight cut-away. The problem seem worse in areas of fairly narrow column stitches, fill areas don't seem to be as much of a problem. Design is a predigitized design from GFrand Slam Designs, and I rarely have any trouble with their designs. Any other suggestions? =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================