[amayausers] Re: Design Pro not saving changes
- From: "E. Orantes" <e3m@xxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Wed, 6 Jul 2005 15:07:22 -0500
Hey Roland,
What are the chances that your Design Shop software and your Amaya
Operating System software are not in fact the same version number??? If
you've upgraded your Design Shop to get new features or for any reason and
figured there was no reason to upgrade your Amaya OS, then your problems
might be stemming from here. I was doing that myself, going from the newest
Design Shop to an older Amaya OS version and the designs were doing all kind
of crazy things. The only way to capture all the new bells and whistles
from software to design is to save it as an .exp file. Of course editing
will be tricky as you'll have to go back to the original file to make
changes and save again as an .exp file.
Could this be your problem?
Ed
Ed & Maralien Orantes
E.M. Broidery
900 Terry Parkway, Ste. 200
New Orleans, La. 70056
504-EMBROID ery (504-362-7643)
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx]On Behalf Of Roland R. Irish III
Sent: Wednesday, July 06, 2005 2:45 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: Design Pro not saving changes
Hi Veena...
I have been saving the changes-and then reloading the file each time-but
then realized the changes were NOT being saved! IF they were-who knows where
it's going! I have noticed under the 'file' listing in DS that I always end
up with TWO file names for the last design worked on-I wonder if 'one' of
the duplicates is a ghost-and when I save to that one it goes to embroidery
limbo? Anone else see the 'double' file names?
Last nite I finished the changes, renamed the file, and shut down
everything. When I open it up tomorrow we'll see if the new file has all the
changes-if it does-then I'll have to start doing changes, then shutting down
to save them!
Bob Spear from Melco just told us on the phone that it does NOT sound
right-shouldn't be working like that! Also says he doesn't know if the
'newest' upgrade is really out-last one we got was late last fall-and I've
been told the newest one was released in April or May....so I'm getting two
different stories here.
Roland
> Hello all,
> I have a older version of Design shop and I ran into the same problem. I
> think I figured out what was happening.
>
> When you load a design on Amaya for you to run the design it copies it to
> a folder under Amaya. This is the file you need to change to get your
> changes in effect. If you are making changes in DS while your design is
> running, after it finishes out, reset the design and reload your design.
> This has been working for me.
>
>
> Best Regards,
> Veena.
>
> IRIS EMBROIDERY
> www.companycasuals.com/IrisEmbroidery
> (510)-226-6171
>
> -----Original Message-----
> From: amayausers-bounce@xxxxxxxxxxxxx
> [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Peachey Threads
> Sent: Wednesday, July 06, 2005 8:07 AM
> To: amayausers@xxxxxxxxxxxxx
> Subject: [amayausers] Re: Design Pro not saving changes
>
> Hi Roland,
>
> Did you apply the Amaya OS Update 5.07.043 (Release 092104.0 P/N 32945)?
I
> know that resolved many of the issues for me. I no longer have to save a
> file as ie. neckerchief1 and neckerchief2. However, I still upon occasion
> have it mess up. I use Wilcom for digitizing and then save it as an exp
> file. Since I still have it happen once it a great while..........that
> tells me it is in the OS software. But like I say......it rarely happens
> now.
>
> Regards,
> Karen Peachey
> Peachey Threads
> Embroidery & Digitizing
> (503)634-2912
>
> It is the Peach
>
>
>
> -----Original Message-----
> From: amayausers-bounce@xxxxxxxxxxxxx
> [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Roland R. Irish III
> Sent: Wednesday, July 06, 2005 5:11 AM
> To: amayausers@xxxxxxxxxxxxx
> Subject: [amayausers] Re: Design Pro not saving changes
>
>
> Here it goes again-and I've complained over and over to Denver and get
the
> reaction that I'm making it up-they don't believe me.... in working on the
> design (for neckerchief) I've made repeated changes in the original in
> Design shop pro, while I watch the design being sewn out (both programs
> running on same computer at same time). When the sewout is done, I make
any
> finally changes to the original (such as line thickness, pattern changes,
> underlayment, cut points, etc.) and then save the changes, usually as
> 'neckerchief1, neckerchief2, etc. Sometimes I just save in that version
and
> then 'send' the image to Amaya. As it has happened in other designs, when
I
> do the next sewout-the changes are NOT there-nothing is different. Easy to
> tell-one part of the design I 'linked' several bars of same color together
> with a manual stitch to keep the head down for speed-and it kept stopping,
> cutting, and sewing the previous setup. Anyone else running into this? I
> wasted about 2 hours of sewouts, changes, repeat sewout, new
changes....then
> realized I was continually changing the same things over and over. Line
> width thicknesses were changing to different numbers-I had a 'border' set
to
> 14, double checked all the 'pieces' and one had changed on its own to
> 17...lettering (Arial, .25 inch) set to 'NO' underlayment suddenly had
> primary and secondary underlayment set in the 'fill' window after I set it
> all to 'none'.... Help! Roland
>
>
>
>
>
>
>
Other related posts:
