[amayausers] Re: Cap Issue
- From: "Janel Harris" <janel@xxxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Fri, 25 Feb 2005 09:07:50 -0800
Herb,
Those columns need a lift which can be accomplished with a center walk
or edgewalk depending on their width.
Janel Harris
Dimensional Designs
http://www.dimdesigns.com
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of HK Acree
Sent: Friday, February 25, 2005 8:00 AM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Cap Issue
Looking for some ideas for sewing a cap. Would like to include a jpg of
the cap to this post but am not sure it is allowed. The cap is an OTTO
23-368, polyester material that has what I can only describe as small
vent holes in it. I have a good design, sewed many dozens of a different
type cap with it. My issue is the small columns want to try to hide in
the vent holes. More column width is not really the answer as this
detracts from the way the design looks. Am considering using poly on top
to see if I can do better. Has anybody used poly on a cap? Any and all
opinions wanted.
Herb
Royal Embroidery
Other related posts:
