[amayausers] Re: Cap Issue
- From: "Sharon" <springer37@xxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Fri, 25 Feb 2005 09:16:50 -0700
Hi Herb,
Sharon here...yes, Rod has sewn many of those caps with the little vent
holes in them. I will get him in here to answer you in a little while.
----- Original Message -----
From: "HK Acree" <hkacree@xxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Friday, February 25, 2005 9:00 AM
Subject: [amayausers] Cap Issue
> Looking for some ideas for sewing a cap. Would like to include a jpg of
the cap to this post but am not sure it is allowed. The cap is an OTTO
23-368, polyester material that has what I can only describe as small vent
holes in it. I have a good design, sewed many dozens of a different type cap
with it. My issue is the small columns want to try to hide in the vent
holes. More column width is not really the answer as this detracts from the
way the design looks. Am considering using poly on top to see if I can do
better. Has anybody used poly on a cap? Any and all opinions wanted.
> Herb
> Royal Embroidery
>
Other related posts:
