[amayausers] Re: Cap Issue
- From: "E. Orantes" <e3m@xxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Fri, 25 Feb 2005 10:49:30 -0600
I'm just thinking that the solvy may be too thin. You would have to use
several sheets to build it up a bit. I have heard of folks using Saran Wrap
or Glad Wrap before. You just wouldn't want to use it in areas where you
would have tons of removal picking to do like in small script lettering.
Inside all the little "e's" and "o's", etc....
Of course you could leave it in and would give a nice shiny/reflective look
to any exposed areas? What say you?
Ed
Ed & Maralien Orantes
E.M. Broidery
900 Terry Parkway, Ste. 200
New Orleans, La. 70056
504-EMBROID ery (504-362-7643)
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx]On Behalf Of HK Acree
Sent: Friday, February 25, 2005 10:21 AM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Cap Issue
Uh, too early, not enough coffee. NOT poly on top, was supposed to say
SOLVY.
Herb
Other related posts:
