[access-uk] Re: gold wave help
- From: "Kevin Lloyd" <kevin.lloyd3@xxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Fri, 13 Jun 2008 20:02:38 +0100
Alternatively, use shift + right arrow to move the start marker to the point
where you want the file to start. Select Save Selection from the file menu and
you're done. This assumes you're wanting to remove a portion from the start of
the file.
If you want to remove a portion from the end of the file it's a very similar
approach but you use control + shift + left arrow to move the end marker
inwards to the point at which you want your file to end before choosing Save
Selection from the file menu.
You could also move the end marker right to the point at which you want to
remove the starting segment and press delete. By doing this, you've selected a
small portion between start and end markers. Once deleted, you can choose save
from the file menu.
You can use spacebar repeatedly to listen back to what you currently have
selected so you can be sure what you will be saving when you've set your start
or end markers. There's an undo option in the edit menu so you can back out
any mistakes and try again without doing any harm to your file.
As you can see, there's many ways to achieve a simple edit using Goldwave so
it's just a case of having a play and seeing what works best for you.
Regards.
Kevin
E-mail: kevin.lloyd3@xxxxxxx
----- Original Message -----
From: Andy Collins
To: access-uk@xxxxxxxxxxxxx
Sent: Friday, June 13, 2008 6:57 PM
Subject: [access-uk] Re: gold wave help
Terry - don't know if this was addressed to me, but will this help? Start the
song playing, when you reach where you want to split the file, pause the track,
and go in to the edit menu and under q points is the drop marker option, hit
enter on this, and a marker will have been placed at the point where you paused
the file. Now go back to the q points menu and hit enter on split file, then
tab through to make your selection, and hit enter on the start button or split
file button whatever it's called.
HTH -
Andy
----- Original Message -----
From: terry cooper
To: access-uk@xxxxxxxxxxxxx
Sent: Friday, June 13, 2008 3:55 PM
Subject: [access-uk] gold wave help
Hi
Andy, could I mail you off list about this, as its probably not strictly
access related.
I'm trying to figure out how to cut off part of a track at the beginning of
a song. I've done it before, but can't remember how. Just wanted to cut off
about ten seconds off the beginning of a song.
Thanks
Terry
Other related posts:
