[access-uk] Re: gold wave help
- From: "Andy Collins" <andy@xxxxxxxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Sat, 14 Jun 2008 12:19:51 +0100
Terry - when I use shift and right arrow, JAWS just says "selected" without
giving any time reading. Peter's way is more accurate and would save you having
to "count in your head" as you could just let the file start, and when you get
to the end of the bit you want to trim, just press the left bracket, then CTRL
t, and that front bit will have been chopped off! -
Andy
----- Original Message -----
From: terry cooper
To: access-uk@xxxxxxxxxxxxx
Sent: Saturday, June 14, 2008 12:19 AM
Subject: [access-uk] Re: gold wave help
Hi Andy
Actually, the key combination is shift and right arrow, and not control and
right arrow.
Terry
----- Original Message -----
From: Kevin Lloyd
To: access-uk@xxxxxxxxxxxxx
Sent: Friday, June 13, 2008 8:02 PM
Subject: [access-uk] Re: gold wave help
Alternatively, use shift + right arrow to move the start marker to the
point where you want the file to start. Select Save Selection from the file
menu and you're done. This assumes you're wanting to remove a portion from the
start of the file.
If you want to remove a portion from the end of the file it's a very
similar approach but you use control + shift + left arrow to move the end
marker inwards to the point at which you want your file to end before choosing
Save Selection from the file menu.
You could also move the end marker right to the point at which you want to
remove the starting segment and press delete. By doing this, you've selected a
small portion between start and end markers. Once deleted, you can choose save
from the file menu.
You can use spacebar repeatedly to listen back to what you currently have
selected so you can be sure what you will be saving when you've set your start
or end markers. There's an undo option in the edit menu so you can back out
any mistakes and try again without doing any harm to your file.
As you can see, there's many ways to achieve a simple edit using Goldwave
so it's just a case of having a play and seeing what works best for you.
Regards.
Kevin
E-mail: kevin.lloyd3@xxxxxxx
----- Original Message -----
From: Andy Collins
To: access-uk@xxxxxxxxxxxxx
Sent: Friday, June 13, 2008 6:57 PM
Subject: [access-uk] Re: gold wave help
Terry - don't know if this was addressed to me, but will this help? Start
the song playing, when you reach where you want to split the file, pause the
track, and go in to the edit menu and under q points is the drop marker option,
hit enter on this, and a marker will have been placed at the point where you
paused the file. Now go back to the q points menu and hit enter on split file,
then tab through to make your selection, and hit enter on the start button or
split file button whatever it's called.
HTH -
Andy
----- Original Message -----
From: terry cooper
To: access-uk@xxxxxxxxxxxxx
Sent: Friday, June 13, 2008 3:55 PM
Subject: [access-uk] gold wave help
Hi
Andy, could I mail you off list about this, as its probably not
strictly access related.
I'm trying to figure out how to cut off part of a track at the
beginning of a song. I've done it before, but can't remember how. Just
wanted to cut off about ten seconds off the beginning of a song.
Thanks
Terry
Other related posts:
