As far as I know, it should be just the power button on its own, have you tried
that?
All the best
Steve
-----Original Message-----
From: access-uk-bounce@xxxxxxxxxxxxx <access-uk-bounce@xxxxxxxxxxxxx> On Behalf
Of Joshua Hendrickson
Sent: 18 November 2022 11:52
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Hello, I have a question about the evo12, I think I
broke it
Hi to all. Thanks to you all for your different suggestions. Holding down the
power button and the exit button just below the down arrow still does nothing.
It isn't the persons fault who sold me this player, but I feel as if I'm out
$90. The player is just sitting and pressing all these different button
combinations isn't working unless I can find the correct one. I wonder if
hooking it up to the computer would do anything?
On 11/18/22, jacoblevi50@xxxxxxxxx <jacoblevi50@xxxxxxxxx> wrote:
Hi Try this,
Hold down the power button and the exit button, which from memory is
the one below the down arrow> Cheers Jake
-----Original Message-----
From: access-uk-bounce@xxxxxxxxxxxxx <access-uk-bounce@xxxxxxxxxxxxx>
On Behalf Of Joshua Hendrickson
Sent: 18 November 2022 11:12
To: Jackie Brown <jackieannbrown62@xxxxxxxxx>
Cc: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Hello, I have a question about the evo12, I
think I broke it
Hello to all. I held down the power and record buttons at the same
time for around a minute and nothing happened. Is there a certain way
I need to do this sequence? The record button is the button just to
the left of the power button? Thanks. This is so frustrating.
On 11/18/22, Joshua Hendrickson <louvins@xxxxxxxxx> wrote:
Thanks all. I asked my dad if there were any lights on the player.
When some button is held down, a red light comes on. I will hold
down the power and record buttons and see what happens. Thanks. I
honestly like the evo10 better then the evo12.
On 11/18/22, Jackie Brown <jackieannbrown62@xxxxxxxxx> wrote:
Thanks for the tip Chris, I didn't know about that.
X-archive-position: 7806
X-ecartis-version: Ecartis v1.0.0
Sender: access-uk-bounce@xxxxxxxxxxxxx
Errors-to: access-uk-bounce@xxxxxxxxxxxxx
X-original-sender: jackieannbrown62@xxxxxxxxx
Precedence: normal
Reply-To: access-uk@xxxxxxxxxxxxx
List-Help: <mailto:ecartis@xxxxxxxxxxxxx?Subject=help>
List-Unsubscribe:
<mailto:access-uk-request@xxxxxxxxxxxxx?Subject=unsubscribe>
List-software: Ecartis version 1.0.0
List-Id: access-uk <access-uk.freelists.org>
X-List-ID: access-uk <access-uk.freelists.org>
List-Subscribe:
<mailto:access-uk-request@xxxxxxxxxxxxx?Subject=subscribe>
List-Owner: <mailto:>
List-post: <mailto:access-uk@xxxxxxxxxxxxx>
List-Archive: <https://www.freelists.org/archive/access-uk>
X-list: access-uk
Kind regards,
Jackie Brown
Email: jackieannbrown62@xxxxxxxxx
-----Original Message-----
From: access-uk-bounce@xxxxxxxxxxxxx
<access-uk-bounce@xxxxxxxxxxxxx> On Behalf Of Chris Miles
Sent: 18 November 2022 09:44
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Hello, I have a question about the evo12, I
think I broke it
Hi,
You could try pressing both the power on button and the record
button together and keep them pressed until the device starts up again.
It wil say that the time is not correct but this wil right itself..
Hope this helps.
Regards,
C
ChrisMiles.
On 18 Nov 2022, at 02:27, Joshua Hendrickson <louvins@xxxxxxxxx> wrote:** To leave the list, click on the immediately-following link:-
Hi to all. I live in the USA and I purchased an evo12 player from
someone who didn't want one. I received it today I turned it on,
and it started talking. I got stuck in a manual that was on it so
I thought I'd turn it off. I turned off the player, then back on again.
I did something that I don't know what it was, and I can't turn it
off or do anything. The player is completely unresponsive . Even
plugging in the power cord doesn't even work. It just sits there.
What should I do? Please help!!!!!
--
Joshua Hendrickson
Joshua Hendrickson
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
--
Joshua Hendrickson
Joshua Hendrickson
--
Joshua Hendrickson
Joshua Hendrickson
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
