IP: 192.168.0.161 Subnet: 255.255.255.0 Default gateway: 192.168.0.1 Spider <spider1@xxxxxxxxxxxxxxx> wrote: To find the IP of your laptop you'll need to click on Start / Run and type "cmd" and run that. At the command prompt type in "ipconfig". That should give you the IP that it has at least for this session. Problem is, that IP can change if you are set to obtain IP's automatically. Included in the information that you will see with the IP is the subnet mask and the gateway. Post the IP, subnet, and gateway here and either myself or someone else that sees it before me can tell you what range of IP's to plug into Zone Alarm to allow access. Spider __________________________ Lene Pagsuguiron lene@xxxxxxxxxxxxxxxxx lpagsugu@xxxxxxxxxxxxxxxx lpagsugu@xxxxxxxxxxx --------------------------------- Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software For a web-based membership management utility and information on list policies, please see http://nibec.com/24hoursupport/ To unsubscribe, send a blank email to 24hoursupport-request@xxxxxxxxxxxxx with "unsubscribe" (without quotes) in the subject.