[visurfacereader] Re: Please pass this around, Logic Pro X accessibility overview draft 5.1

  • From: Bryan Smart <bryansmart@xxxxxxxxxxxxxx>
  • To: visurfacereader@xxxxxxxxxxxxx
  • Date: Wed, 20 Aug 2014 13:19:58 -0400

Tim, can you describe the work-around in brief? I don’t need details or 
hand-holding, but not sure what tweak is needed.

I’ve given up on Mackie Control compatible gear like the ProjectMix and 
BCF2000, and now have a real Mackie Control Universal Pro. Also dumping my 
BCR2000 for a Mackie C4. Of the other low-cost surfaces, only the ProjectMix, 
and perhaps the FW1884, are close to the MCU’s construction quality. Of course, 
the ProjectMix and FW1884 are old products with horrible Mac support now, so 
not good options, anyway.

For others on the list that might be curious about the differences, the MCU has 
more dedicated buttons for functions than any of the other units that I listed. 
The MCU Pro is also significantly more compact than they are. Finally, the jog 
wheel on the MCU Pro is beefier, has a bit of weighted inertia to it, and has 
an all-around better feel to it than the ones that I’ve used on the ProjectMix 
and FW1884. The other Mackie Control compatible units always seem to cut some 
corner or another, even if a small one, and it is nice to finally have the real 
deal.

Bryan



On Aug 19, 2014, at 5:21 PM, Tim Burgess <tim@xxxxxxxxxxxxx> wrote:

> Hi,
> 
> There's currently a problem when trying to use SurfaceReader with Logic. The
> Logic development team have a copy of the application and I'm waiting to
> hear some suggestions. There is a way around, but it's dependent on you
> having sighted help to set it up, so this is obviously unsatisfactory.
> 
> I'll post back on this as soon as I have something more constructive to add.
> 
> Best wishes.
> Tim Burgess
> 
> -----Original Message-----
> From: visurfacereader-bounce@xxxxxxxxxxxxx
> [mailto:visurfacereader-bounce@xxxxxxxxxxxxx] On Behalf Of ramy moustafa
> Sent: 19 August 2014 19:00
> To: visurfacereader@xxxxxxxxxxxxx
> Subject: [visurfacereader] Re: Please pass this around, Logic Pro X
> accessibility overview draft 5.1
> 
> What version i must use from logic?
> 
> Ramy moustafa saber
> Musicc instructor at:
> faculty of musical education
> music arranger and sound engineer
> Sent from my iPhone
> 
>> On May 22, 2014, at 6:06 PM, Keith Reedy <keithreedy@xxxxxxxxxxxx> wrote:
>> 
>> Hi folks,
>> 
>> This is now on line at,
>> 
> http://icanworkthisthing.com/docs/mac_with_voiceover/audio/Logic%20With%20Vo
> iceover/LogicProXAccessibilityOverviewdraft5_1.shtml
>> 
>> Just a change in drag and drop loops.
>> 
>> This is as far as I will take the overview.  I think if one reads the
> users guide they will get along fine.
>> We print the Bible in Braille,
>> http://biblesfortheblind.org
>> Keith Reedy
>> God gives His best to those who leave the choice with Him.  J Hudson
> Taylor.
>> 
>> 
>> 
>> 
>> 
>> 
>> We are Braille Bible printers,
>> http://biblesfortheblind.org
>> Keith Reedy
>> keithreedy@xxxxxxxxxxxx
>> 
>> 
>> 
>> 
>> 
> 
> 
>

Other related posts:

  1. Home
  2. visurfacereader
  3. Archive
  4. 08-2014