[THIN] Re: PXE Boot to ADS/WDS for Compaq G5s
- From: "M" <mathras@xxxxxxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Tue, 5 Feb 2008 21:02:01 -0000
PXE Boot to ADS/WDS for Compaq G5sHello Andrew,
Are the ADS drivers similar to RIS or Windows PE drivers ? (I use the HP Rapid
Deployment Pack myself so i am not 100% certain).
Have you been to the new ( awful - older compaq based one was far better ) HP
driver site for the DL360 G5 ?
Half way down the page is a driver update for RIS / Windows PE
"HP NC-Series Multifunction Drivers for RIS/WinPE"
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=uk&prodTypeId=15351&prodSeriesId=1121486&prodNameId=3288144&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-64e3bfc34a2742baa89aa98fb0
Sorry if they arent the same.
Matt
----- Original Message -----
From: Andrew Wood
To: thin@xxxxxxxxxxxxx
Sent: Monday, February 04, 2008 8:30 AM
Subject: [THIN] PXE Boot to ADS/WDS for Compaq G5s
Hi,
Has anyone been able to successfully boot a Compaq G5 to an ADS/WDS build?
Every driver I try comes up with a RAMDISK error - I've seen an article that
suggests using specific Broadcom II drivers but I've had no joy with that either
Tia.
Andrew
Gilwood CS Ltd
Registered Office : 197 Leechmere Road, Sunderland, UK, SR2 9DL. No. 6099397
England
Other related posts:
