[THIN] Re: PXE Boot to ADS/WDS for Compaq G5s
- From: "Andrew Wood" <andrew.wood@xxxxxxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Thu, 7 Feb 2008 09:29:27 -0000
Thanks for that Eric.
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Jolley, Eric
Sent: 06 February 2008 20:03
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: PXE Boot to ADS/WDS for Compaq G5s
That's it. They also call it a monolithic driver. I've been using it
successfully with ADS on DL360 G5's and DL580 G4's for about 9 months.
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Andrew Wood
Sent: Wednesday, February 06, 2008 2:31 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: PXE Boot to ADS/WDS for Compaq G5s
OOOoOOoo I don't know - I didn't spot that one
I saw all the other drivers but didn't notice the RIS one - I'll check.
Thanks.
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of M
Sent: 05 February 2008 21:02
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: PXE Boot to ADS/WDS for Compaq G5s
Hello Andrew,
Are the ADS drivers similar to RIS or Windows PE drivers ? (I use the HP
Rapid Deployment Pack myself so i am not 100% certain).
Have you been to the new ( awful - older compaq based one was far better )
HP driver site for the DL360 G5 ?
Half way down the page is a driver update for RIS / Windows PE
"HP NC-Series Multifunction Drivers for RIS/WinPE"
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lan
g=en
<http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?la
ng=en&cc=uk&prodTypeId=15351&prodSeriesId=1121486&prodNameId=3288144&swEnvOI
D=1005&swLang=8&mode=2&taskId=135&swItem=MTX-64e3bfc34a2742baa89aa98fb0>
&cc=uk&prodTypeId=15351&prodSeriesId=1121486&prodNameId=3288144&swEnvOID=100
5&swLang=8&mode=2&taskId=135&swItem=MTX-64e3bfc34a2742baa89aa98fb0
Sorry if they arent the same.
Matt
----- Original Message -----
From: Andrew Wood <mailto:andrew.wood@xxxxxxxxxxxxxxxx>
To: thin@xxxxxxxxxxxxx
Sent: Monday, February 04, 2008 8:30 AM
Subject: [THIN] PXE Boot to ADS/WDS for Compaq G5s
Hi,
Has anyone been able to successfully boot a Compaq G5 to an ADS/WDS build?
Every driver I try comes up with a RAMDISK error - I've seen an article that
suggests using specific Broadcom II drivers but I've had no joy with that
either
Tia.
Andrew
Gilwood CS Ltd
Registered Office : 197 Leechmere Road, Sunderland, UK, SR2 9DL. No.
6099397 England
Other related posts:
