[THIN] Re: PXE Boot to ADS/WDS for Compaq G5s
- From: "Jolley, Eric" <Eric.Jolley@xxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Wed, 6 Feb 2008 13:03:15 -0700
That's it. They also call it a monolithic driver. I've been using it
successfully with ADS on DL360 G5's and DL580 G4's for about 9 months.
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf Of Andrew Wood
Sent: Wednesday, February 06, 2008 2:31 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: PXE Boot to ADS/WDS for Compaq G5s
OOOoOOoo I don't know - I didn't spot that one
I saw all the other drivers but didn't notice the RIS one - I'll check.
Thanks.
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf Of M
Sent: 05 February 2008 21:02
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: PXE Boot to ADS/WDS for Compaq G5s
Hello Andrew,
Are the ADS drivers similar to RIS or Windows PE drivers ? (I use the
HP Rapid Deployment Pack myself so i am not 100% certain).
Have you been to the new ( awful - older compaq based one was far better
) HP driver site for the DL360 G5 ?
Half way down the page is a driver update for RIS / Windows PE
"HP NC-Series Multifunction Drivers for RIS/WinPE"
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp
?lang=en&cc=uk&prodTypeId=15351&prodSeriesId=1121486&prodNameId=3288144&
swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-64e3bfc34a2742baa89a
a98fb0
Sorry if they arent the same.
Matt
----- Original Message -----
From: Andrew Wood <mailto:andrew.wood@xxxxxxxxxxxxxxxx>
To: thin@xxxxxxxxxxxxx
Sent: Monday, February 04, 2008 8:30 AM
Subject: [THIN] PXE Boot to ADS/WDS for Compaq G5s
Hi,
Has anyone been able to successfully boot a Compaq G5 to an
ADS/WDS build?
Every driver I try comes up with a RAMDISK error - I've seen an
article that suggests using specific Broadcom II drivers but I've had no
joy with that either
Tia.
Andrew
Gilwood CS Ltd
Registered Office : 197 Leechmere Road, Sunderland, UK, SR2
9DL. No. 6099397 England
Other related posts:
