[THIN] Re: HP Thin Clients (newer Models)
- From: "Schneider, Chad M" <CMSchneider@xxxxxxxxx>
- To: "'thin@xxxxxxxxxxxxx'" <thin@xxxxxxxxxxxxx>
- Date: Wed, 20 Apr 2005 13:57:15 -0500
Now I just have to figure out how Altiris works into eh whole scheme. I was
hoping to use it to build images a preconfigured Thin Client, to be able to
push it to other thin clients, if needed.
I was hoping I could totally build one out, create a "disk" image and go.
I try to create disk image from the single thin client, it says uploading,
but the thin client just reboots, reboots, reboots.
And I thought this setup would make my life easier.
_____
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Angus Macdonald
Sent: Wednesday, April 20, 2005 9:10 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: HP Thin Clients (newer Models)
I take it that's helped a bit.
-----Original Message-----
From: Schneider, Chad M [mailto:CMSchneider@xxxxxxxxx]
Sent: 20 April 2005 14:24
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] Re: HP Thin Clients (newer Models)
AH!
_____
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Angus Macdonald
Sent: Wednesday, April 20, 2005 8:21 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: HP Thin Clients (newer Models)
I have to hold my hands up and admit that I'm not entirely sure. All I know
is we created a local user account (called User) not in the administrators
group and when that user logs in to kiosk mode (using autologon) the buttons
along the bottom of the connection manager window have vanished. I don't
remember doing anything special to set it up that way, it just happened.
When logged in as Administrator, all the buttons are present and correct.
I've just created a test user on a nearby terminal. When the username is
flagged as an administrator, the connection manager options are there. When
the administrator tickbox (connection
manager>Advanced>Security>Users>username>modify>permissions) is unticked,
the connection manager is locked down.
-----Original Message-----
From: Schneider, Chad M [mailto:CMSchneider@xxxxxxxxx]
Sent: 20 April 2005 13:22
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] Re: HP Thin Clients (newer Models)
How did you force the cut down connection manager for users and not for
admins?
This is where it becomes confusing so far. Seems if I set kiosk, everyone
(including admin) gets kiosk, I hide connection center, it is gone for
everyone.
I want to run it locked down, but need some accessibility for the admins, of
course.
I have altiris, man, that is no picnic to install. I need to find a SQL
server I can install it on.
_____
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Angus Macdonald
Sent: Wednesday, April 20, 2005 3:42 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: HP Thin Clients (newer Models)
We're just starting to roll out a couple of hundred T5500s. We have them
setup to autologin as a restricted user, with the option of pressing ESC to
login as the local administrator during the 5 second autologin countdown.
Standard users get the terminal in kiosk mode with only the cut-down
connection manager and a single autostart ICA connection. Administrators get
the full connection manager ,including options to reenable the desktop.
Assuming you've deployed Altiris (the client licenses come with the
terminals so it's a good move), you can reimage, remotely control (including
logging users off and logging on as the administrator), reboot etc from your
desktop.
-----Original Message-----
From: Schneider, Chad M [mailto:CMSchneider@xxxxxxxxx]
Sent: 19 April 2005 21:08
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] HP Thin Clients (newer Models)
Anyone have any knowledge of the configuration of the newer model HP thin
clients?
Chad M. Schneider
Technology Analyst
Bemis Company, Inc.
920-303-7609
"Just because you can, does not mean that you should."
Gallai'r e-bost yma gynnwys gwybodaeth gyfrinachol a/neu ddeunydd
hawlfraint. Os ydych chi'n meddwl eich bod wedi derbyn yr e-bost yma drwy
gamgymeriad rydym yn ymddiheuro am hyn; peidiwch os gwelwch yn dda â
datgelu, anfon ymlaen, printio, copïo na dosbarthu gwybodaeth yn yr e-bost
yma na gweithredu mewn unrhyw fodd drwy ddibynnu ar ei gynnwys: gwaherddir
gwneud hynny'n gyfan gwbl a gallai fod yn anghyfreithlon. Rhowch wybod i'r
anfonwr fod y neges yma wedi mynd ar goll cyn ei dileu.
Mae unrhyw safbwynt neu farn a gyflwynir yn eiddo i'r awdur ac nid ydynt o
anghenraid yn cynrychioli safbwynt neu farn Ymddiriedolaeth GIG Gogledd
Orllewin Cymru.
Gallai cynnwys yr e-bost yma gael ei ddatgelu i'r cyhoedd o dan Gôd Bod yn
Agored y GIG neu Ddeddf Rhyddid Gwybodaeth 2000. Nid oes modd gwarantu
cyfrinachedd y neges ac unrhyw ateb.
Bydd y neges yma ac unrhyw ffeiliau cysylltiedig wedi cael eu gwirio gan
feddalwedd canfod firws cyn eu trosglwyddo. Ond rhaid i'r sawl sy'n derbyn
wirio rhag firws ei hun cyn agor unrhyw ymgysylltiad. Nid yw'r
Ymddiriedolaeth yn derbyn unrhyw gyfrifoldeb am unrhyw golled neu niwed a
allai gael ei achosi gan firws meddalwedd.
This e-mail may contain confidential information and/or copyright material.
If you believe that you have received this e-mail in error please accept our
apologies; please do not disclose, forward, print, copy or distribute
information in this e-mail or take any action in reliance on its contents:
to do so is strictly prohibited and may be unlawful. Please inform the
sender that this message has gone astray before deleting it.
Any views or opinions presented are to be understood as those of the author
and do not necessarily represent those of the North West Wales NHS Trust.
The contents of this e-mail may be subject to public disclosure under the
NHS Code of Openness or the Freedom of Information Act 2000. The
confidentiality of the message and any reply cannot be guaranteed.
This message and any attached files will have been checked with virus
detection software before transmission. However, recipients must carry out
their own virus checks before opening any attachment. The Trust accepts no
liability for any loss or damage, which may be caused by software viruses.
Other related posts:
