[TechAssist] Re: Questions on hooking up Chipper checker
- From: Gary McCartney <number63@xxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Tue, 23 Jul 2002 17:14:28 -0400
How do you use the Chipper Checker to test an eeprom out of the circuit,
being there is no direct eeprom plug-in socket for the Chipper Checker?
At least going by the one I just bought, it came with 4 adapters but
they all plug into a socket on the TV main board.
Gary McCartney
McCartney Electronics
7134 Fife Rd, RR 7
Guelph Ontario Canada N1H 6J4
Fax: (519)821-1530
email: number63 (at) inetsonic.com
Bill S wrote:
>
> I have done it that way also... The only thing I have not done yet is to
> take the EEprom out of the circuit...and will be doing that now too....
> Bill Sorensen
> New Life Video & Audio
> billans@xxxxxxxxxxxx
> - - - - - - - - - - - - - - - - - - -
>
> ----- Original Message -----
> From: "Barry Thompson" <barrystv@xxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Tuesday, July 23, 2002 10:55 AM
> Subject: [TechAssist] Re: Questions on hooking up Chipper checker
>
> >
> > Bill the 5 volts must be applied to the eprom first before you put the pst
> > cable into the interface box anyway that's how its done on the 195/97 and
> > the 203. Barry.
> > Barrys TV
> > barrystv@xxxxxxx
> > 613 224 3406
> > fax 613 723 9670
> > 0ttawa,Canada
> > ----- Original Message -----
> > From: "Bill S" <billans@xxxxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Tuesday, July 23, 2002 5:58 PM
> > Subject: [TechAssist] Re: Questions on hooking up Chipper checker
> >
> >
> > >
> > > Do you mean to say if it says there is no communication to go and reset
> > the
> > > eeprom on the top of the program?
> > > Thanks
> > > Bill Sorensen
> > > New Life Video & Audio
> > > billans@xxxxxxxxxxxx
> > > - - - - - - - - - - - - - - - - - - -
> > >
> > > ----- Original Message -----
> > > From: "Bruce Tiedeman" <btied@xxxxxxxxxxxx>
> > > To: <techassist@xxxxxxxxxxxxx>
> > > Sent: Tuesday, July 23, 2002 9:54 AM
> > > Subject: [TechAssist] Re: Questions on hooking up Chipper checker
> > >
> > >
> > > >
> > > > I have not done many myself but have managed. You have to select
> chassis
> > > and
> > > > highlight the chassis number , then you hook up power to the EPROM.
> Next
> > > hit
> > > > the button again that you used to select chassis. The software should
> > > > communicate with the chipper check. If there is no communication it
> will
> > > > tell you. After this go to the top of the program and you can select
> > reset
> > > > EPROM.
> > > > I removed the EPROM from the chassis ,this eliminated the need to
> > ground
> > > it
> > > > when it is in the chassis.
> > > >
> > > > I hope this helps,
> > > >
> > > > Bruce.
> > > > B&T Electronics
> > > >
> > > > ----- Original Message -----
> > > > From: "Bill S" <billans@xxxxxxxxxxxx>
> > > > To: <techassist@xxxxxxxxxxxxx>
> > > > Sent: Tuesday, July 23, 2002 3:40 PM
> > > > Subject: [TechAssist] Questions on hooking up Chipper checker
> > > >
> > > >
> > > > >
> > > > > Hi all
> > > > > We got this new chipper checker in and are using it for initializing
> a
> > > CTC
> > > > > 187 and learning about this at the same time. The instructions say
> to
> > > > > ground either pin 2 or pin 1 (depending on who made the micro u
> 3101.
> > I
> > > > > found the instructions up to this point but now tried to go to the
> > next
> > > > > setup procedure and I got to be honest, I have not found it and am
> > > > starting
> > > > > to feel real stupid now. I'm not totally computer illiterate but am
> > > > > starting to think I should have written the instuctions as it would
> be
> > a
> > > > bit
> > > > > more easier to follow. Where else am I to look in the instructions?
> > > > > Thanks
> > > > > Bill Sorensen
> > > > > New Life Video & Audio
> > > > > billans@xxxxxxxxxxxx
> > > > > - - - - - - - - - - - - - - - - - - -
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > ------------------------------------------
> > > > > To REMOVE your email address, click here:
> > > > > http://www.tech-assist.org/unsubb.html
> > > > > To CHANGE your email address, click here:
> > > > > http://www.tech-assist.org/change.html
> > > > > ------------------------------------------
> > > > > ***NEW*** Tips Added Instantly!!!***
> > > > > Submit Repair Tips here:
> > > > > http://www.tech-assist.org/secure/tip/
> > > >
> > > > ------------------------------------------
> > > > To REMOVE your email address, click here:
> > > > http://www.tech-assist.org/unsubb.html
> > > > To CHANGE your email address, click here:
> > > > http://www.tech-assist.org/change.html
> > > > ------------------------------------------
> > > > ***NEW*** Tips Added Instantly!!!***
> > > > Submit Repair Tips here:
> > > > http://www.tech-assist.org/secure/tip/
> > > >
> > >
> > >
> > >
> > > ------------------------------------------
> > > To REMOVE your email address, click here:
> > > http://www.tech-assist.org/unsubb.html
> > > To CHANGE your email address, click here:
> > > http://www.tech-assist.org/change.html
> > > ------------------------------------------
> > > ***NEW*** Tips Added Instantly!!!***
> > > Submit Repair Tips here:
> > > http://www.tech-assist.org/secure/tip/
> >
> > ------------------------------------------
> > To REMOVE your email address, click here:
> > http://www.tech-assist.org/unsubb.html
> > To CHANGE your email address, click here:
> > http://www.tech-assist.org/change.html
> > ------------------------------------------
> > ***NEW*** Tips Added Instantly!!!***
> > Submit Repair Tips here:
> > http://www.tech-assist.org/secure/tip/
> >
>
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.tech-assist.org/change.html
> ------------------------------------------
> ***NEW*** Tips Added Instantly!!!***
> Submit Repair Tips here:
> http://www.tech-assist.org/secure/tip/
--
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.tech-assist.org/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
