[TechAssist] Re: Questions on hooking up Chipper checker
- From: Gary McCartney <number63@xxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Wed, 24 Jul 2002 22:04:21 -0400
I just learned there has been circuits designed to add onto the Chipper
Checker to do this.
Gary McCartney
McCartney Electronics
7134 Fife Rd, RR 7
Guelph Ontario Canada N1H 6J4
Fax: (519)821-1530
email: number63 (at) inetsonic.com
Damon wrote:
>
> Chipper checker was not designed to test the EEprom out of circuit, in
> circuit only.
> Damon Brunger
> damon101@xxxxxxxxxxxxxx
> Telrad Electronic Services
> Ft Wayne, IN 46815
> ----- Original Message -----
> From: "Gary McCartney" <number63@xxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Tuesday, July 23, 2002 4:14 PM
> Subject: [TechAssist] Re: Questions on hooking up Chipper checker
>
> >
> > How do you use the Chipper Checker to test an eeprom out of the circuit,
> > being there is no direct eeprom plug-in socket for the Chipper Checker?
> > At least going by the one I just bought, it came with 4 adapters but
> > they all plug into a socket on the TV main board.
> >
> >
> > Gary McCartney
> >
> > McCartney Electronics
> > 7134 Fife Rd, RR 7
> > Guelph Ontario Canada N1H 6J4
> > Fax: (519)821-1530
> > email: number63 (at) inetsonic.com
> >
> >
> >
> >
> >
> > Bill S wrote:
> > >
> > > I have done it that way also... The only thing I have not done yet is
> to
> > > take the EEprom out of the circuit...and will be doing that now too....
> > > Bill Sorensen
> > > New Life Video & Audio
> > > billans@xxxxxxxxxxxx
> > > - - - - - - - - - - - - - - - - - - -
> > >
> > > ----- Original Message -----
> > > From: "Barry Thompson" <barrystv@xxxxxxx>
> > > To: <techassist@xxxxxxxxxxxxx>
> > > Sent: Tuesday, July 23, 2002 10:55 AM
> > > Subject: [TechAssist] Re: Questions on hooking up Chipper checker
> > >
> > > >
> > > > Bill the 5 volts must be applied to the eprom first before you put the
> pst
> > > > cable into the interface box anyway that's how its done on the 195/97
> and
> > > > the 203. Barry.
> > > > Barrys TV
> > > > barrystv@xxxxxxx
> > > > 613 224 3406
> > > > fax 613 723 9670
> > > > 0ttawa,Canada
> > > > ----- Original Message -----
> > > > From: "Bill S" <billans@xxxxxxxxxxxx>
> > > > To: <techassist@xxxxxxxxxxxxx>
> > > > Sent: Tuesday, July 23, 2002 5:58 PM
> > > > Subject: [TechAssist] Re: Questions on hooking up Chipper checker
> > > >
> > > >
> > > > >
> > > > > Do you mean to say if it says there is no communication to go and
> reset
> > > > the
> > > > > eeprom on the top of the program?
> > > > > Thanks
> > > > > Bill Sorensen
> > > > > New Life Video & Audio
> > > > > billans@xxxxxxxxxxxx
> > > > > - - - - - - - - - - - - - - - - - - -
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Bruce Tiedeman" <btied@xxxxxxxxxxxx>
> > > > > To: <techassist@xxxxxxxxxxxxx>
> > > > > Sent: Tuesday, July 23, 2002 9:54 AM
> > > > > Subject: [TechAssist] Re: Questions on hooking up Chipper checker
> > > > >
> > > > >
> > > > > >
> > > > > > I have not done many myself but have managed. You have to select
> > > chassis
> > > > > and
> > > > > > highlight the chassis number , then you hook up power to the
> EPROM.
> > > Next
> > > > > hit
> > > > > > the button again that you used to select chassis. The software
> should
> > > > > > communicate with the chipper check. If there is no communication
> it
> > > will
> > > > > > tell you. After this go to the top of the program and you can
> select
> > > > reset
> > > > > > EPROM.
> > > > > > I removed the EPROM from the chassis ,this eliminated the need to
> > > > ground
> > > > > it
> > > > > > when it is in the chassis.
> > > > > >
> > > > > > I hope this helps,
> > > > > >
> > > > > > Bruce.
> > > > > > B&T Electronics
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > From: "Bill S" <billans@xxxxxxxxxxxx>
> > > > > > To: <techassist@xxxxxxxxxxxxx>
> > > > > > Sent: Tuesday, July 23, 2002 3:40 PM
> > > > > > Subject: [TechAssist] Questions on hooking up Chipper checker
> > > > > >
> > > > > >
> > > > > > >
> > > > > > > Hi all
> > > > > > > We got this new chipper checker in and are using it for
> initializing
> > > a
> > > > > CTC
> > > > > > > 187 and learning about this at the same time. The instructions
> say
> > > to
> > > > > > > ground either pin 2 or pin 1 (depending on who made the micro u
> > > 3101.
> > > > I
> > > > > > > found the instructions up to this point but now tried to go to
> the
> > > > next
> > > > > > > setup procedure and I got to be honest, I have not found it and
> am
> > > > > > starting
> > > > > > > to feel real stupid now. I'm not totally computer illiterate
> but am
> > > > > > > starting to think I should have written the instuctions as it
> would
> > > be
> > > > a
> > > > > > bit
> > > > > > > more easier to follow. Where else am I to look in the
> instructions?
> > > > > > > Thanks
> > > > > > > Bill Sorensen
> > > > > > > New Life Video & Audio
> > > > > > > billans@xxxxxxxxxxxx
> > > > > > > - - - - - - - - - - - - - - - - - - -
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > ------------------------------------------
> > > > > > > To REMOVE your email address, click here:
> > > > > > > http://www.tech-assist.org/unsubb.html
> > > > > > > To CHANGE your email address, click here:
> > > > > > > http://www.tech-assist.org/change.html
> > > > > > > ------------------------------------------
> > > > > > > ***NEW*** Tips Added Instantly!!!***
> > > > > > > Submit Repair Tips here:
> > > > > > > http://www.tech-assist.org/secure/tip/
> > > > > >
> > > > > > ------------------------------------------
> > > > > > To REMOVE your email address, click here:
> > > > > > http://www.tech-assist.org/unsubb.html
> > > > > > To CHANGE your email address, click here:
> > > > > > http://www.tech-assist.org/change.html
> > > > > > ------------------------------------------
> > > > > > ***NEW*** Tips Added Instantly!!!***
> > > > > > Submit Repair Tips here:
> > > > > > http://www.tech-assist.org/secure/tip/
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > ------------------------------------------
> > > > > To REMOVE your email address, click here:
> > > > > http://www.tech-assist.org/unsubb.html
> > > > > To CHANGE your email address, click here:
> > > > > http://www.tech-assist.org/change.html
> > > > > ------------------------------------------
> > > > > ***NEW*** Tips Added Instantly!!!***
> > > > > Submit Repair Tips here:
> > > > > http://www.tech-assist.org/secure/tip/
> > > >
> > > > ------------------------------------------
> > > > To REMOVE your email address, click here:
> > > > http://www.tech-assist.org/unsubb.html
> > > > To CHANGE your email address, click here:
> > > > http://www.tech-assist.org/change.html
> > > > ------------------------------------------
> > > > ***NEW*** Tips Added Instantly!!!***
> > > > Submit Repair Tips here:
> > > > http://www.tech-assist.org/secure/tip/
> > > >
> > >
> > > ------------------------------------------
> > > To REMOVE your email address, click here:
> > > http://www.tech-assist.org/unsubb.html
> > > To CHANGE your email address, click here:
> > > http://www.tech-assist.org/change.html
> > > ------------------------------------------
> > > ***NEW*** Tips Added Instantly!!!***
> > > Submit Repair Tips here:
> > > http://www.tech-assist.org/secure/tip/
> >
> > --
> > ------------------------------------------
> > To REMOVE your email address, click here:
> > http://www.tech-assist.org/unsubb.html
> > To CHANGE your email address, click here:
> > http://www.tech-assist.org/change.html
> > ------------------------------------------
> > ***NEW*** Tips Added Instantly!!!***
> > Submit Repair Tips here:
> > http://www.tech-assist.org/secure/tip/
> >
> >
>
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.tech-assist.org/change.html
> ------------------------------------------
> ***NEW*** Tips Added Instantly!!!***
> Submit Repair Tips here:
> http://www.tech-assist.org/secure/tip/
--
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.tech-assist.org/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
