Please check out SPEED2000 from Sigrity (www.sigrity.com) for lossy transmission line modeling directly from your physical and electrical data. Teo Yatman -----Original Message----- From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]On Behalf Of Dennis Schmitz Sent: Tuesday, July 24, 2001 2:50 PM To: si-list@xxxxxxxxxxxxx Subject: [SI-LIST] Tool Recommendations? I am beginning a project which requires signal integrity analysis across a system including multiple PCB, connector and cable transitions. It requires lossy transmission line modelling for signals from 100MBit/sec to 800MBit/sec. I believe the best available lossy transmission line modelling is in HSPICE. Is this true? Does anyone have a recommendation for extracting PCB data to geneate spice models? Are there more appropriate tools for this job? Thanks in advance. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu