[SI-LIST] Re: PCI Timing Q?

>  Is  Tval(max) measured relative to clk(i) and Tval(min) measured
> relative to clk(i+1)?
 
Tval(max) would be used along with Tsu, Tprop(max), and Tskew when
checking the transfer of data from clk(i) at the driver to clk(i+1) at
the receiver.

Tval(min) would be used along with Th, Tprop(min), and Tskew when making
sure that the data from clk(i) at the driver doesn't get caught by
clk(i) at the receiver.

Andy



------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: