[SI-LIST] Re: DDR SDRAM signal routing
- From: Darshan Mehta <darshanmehta2k@xxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Tue, 9 Nov 2004 14:53:55 -0800 (PST)
Brian, that?s not always correct. Some times the Application note or guideline
does not help. I designed a Board with Intel Processor i960 which works at 33
MHz and I just followed the Application note guidelines. I did not simulate the
board and the design failed in first attempt. I am not saying that there may be
some mistake in Application note, I might have missed something. If I would
have simulated, this might not had happened. After simulating the board, I made
it work. It is always good if we simulate the board and check it for our
satisfaction.
Best Regards,
Darshan Mehta
---------------------------------
Do you Yahoo!?
Check out the new Yahoo! Front Page. www.yahoo.com
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
