Hi all, I have a small polygon in a plane layer of a multi-layer PCB. There is a solid ground plane underneath it and the top signal layer above. I have calculated from the basic plane capacitance equation that the plane capacitance for this polygon should be in the range of 420 pF. However, I am measuring 890 pF with one meter and 1 nF with another. I was wondering what am I doing wrong? Thanks, /Mikhail ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.net List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu