[rollei_list] Anti Newton Ring Glass Effect on Enlarging
- From: Elias Roustom <eroustom@xxxxxxxxxxx>
- To: rollei_list@xxxxxxxxxxxxx
- Date: Thu, 28 May 2009 21:00:42 -0400
Hi All,
I think this question is best for all the optics aficionados here:
My enlarger uses AN glass above the neg, and clear glass below. With
my b&w Rollei negs this works very well, but with color negs not well
at all. Even though the emulsion side is in contact with the clear
glass, I still get rings. I'm thinking of getting another piece of AN
glass for below the neg. (emulsion side). Will that have any effect
on the projection, and the resulting print?
Thanks,
Elias
---
Rollei List
- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'
in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with
'unsubscribe' in the subject field OR by logging into www.freelists.org
- Online, searchable archives are available at
//www.freelists.org/archives/rollei_list
Other related posts:
