Dear Eric,There is a "white" colour, that can cover things again, well somewhat, it depends on how saturated the gelatin is. Otherwise you really have to use a "covering" paint..
But I admit I have never used it, I always colour the print very slowly and build it up gradually. I try not to make ther paintbrush too wet, so that the colour does not flow all over the print.
But my models love the "power" of black and white with a little dab of colour - like for the lips, eyeliner or ear-rings. Also if the model has very "clear" eyes then painting them light-blue or pale green is very stark.
Also if you have a nice b/w landscape then colouring the odd tree or rock can be fascinating...
I just checked: the array of 13 colours is about 100 US Dollars or 60 Euros in real money :-)
Love, Snoopy At 16:11 03.12.2007, you wrote:
What do you use to remove an over colored area? Eric Neilsen Photography 4101 Commerce Street Suite 9 Dallas, TX 75226 http://e.neilsen.home.att.net http://ericneilsenphotography.com Skype ejprinter > -----Original Message----- > From: pure-silver-bounce@xxxxxxxxxxxxx [mailto:pure-silver- > bounce@xxxxxxxxxxxxx] On Behalf Of Snoopy > Sent: Monday, December 03, 2007 7:33 AM > To: pure-silver@xxxxxxxxxxxxx > Subject: [pure-silver] Re: learning to hand color photographs > > Dear Shannon, > > in this country we can buy liquid colours which are protein-based > (Anilin colours?) and these bond chemically with the gelatin of the paper. >
"Ceterum censeo, digitalem esse delendam"
============================================================================================================= To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.