[pure-silver] Re: curled fiber edges

Another method besides dry mount press flattening I have used. I squeegee my
fiber prints then tape the edges to Formica covered plywood. After the print
dries I trim the edges. I found some counter top which worked for prints up
to 16"x20". I have a Formica desk top for prints that are larger in size.

Jonathan Ayers   [mail1@xxxxxxxxxxxxxxxxx]

No virus found in this outgoing message.
Checked by AVG. 
Version: 7.5.524 / Virus Database: 269.23.3/1393 - Release Date: 4/23/2008
8:12 AM
 

=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: