"Jim Brick" <jim@xxxxxxxxx>
Pliobond http://www.micro-tools.com/store/SearchByCategory.aspx?CategoryCode=ADH
For removable applications don't follow the instructions on the bottle - they are for permanent gluing. Apply a thin film of the adhesive to _one side only_ and let dry to tacky. Then assemble the parts.If you put adhesive on both parts it will stick like the bejesus the first time the parts come in contact.
Wetting the adhesive slightly with 91% isopropyl alcohol lets the parts slide over each other for alignment. For a rubber lens grip tube you may want to only have adhesive in a few dabs around the end of the tube at both ends. Nicholas O. Lindan Cleveland Engineering Design, LLC Cleveland, Ohio 44121 ============================================================================================================= To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.