[pure-silver] How to build a sink in a corner ?

Hi !
The contractor I hired to do the masonry work has just finished my "next 
new darkroom" !
So now I face the equipment construction problem (and have all the stuff 
I own fit inside...)
The major problem is that the only place I have for the sink is a corner 
of the room.... one side is 1m90 cm (5 3/4 feet) and the other is 1m 70 
cm (5 feet) long. but, if I've a good idea on how to build a rectangular 
plywood sink, I suspect my case to be a builder's nightmare....
So any help will be greatly appreciated ! Plans, pictures, construction 
details, all will help !
TIA !
P.S. I own a set of books on the subject :
The Kodak "building a home darkroom", "The darkroom handbook" by Dennis 
Curtin and Joe DeMaio, and "build your own home darkroom" by Lista Duren 
and Will McDonald.
-- 
Ce message est constitué d'au moins 50 % d'électrons recyclés.
Aucun électron n'a été blessé ou forcé d'aucune manière
pendant l'écriture de ce message. S'il vous plaît aidez nous
à conserver nos ressources, recyclez vos électrons !
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: