[pure-silver] Re: How to build a sink in a corner ?
- From: Jim Brick <jim@xxxxxxxxx>
- To: pure-silver@xxxxxxxxxxxxx
- Date: Mon, 28 Mar 2005 22:42:49 -0800
At 09:29 PM 3/28/2005, Georges Giralt wrote:
>Hi !
>The contractor I hired to do the masonry work has just finished my "next
>new darkroom" !
>So now I face the equipment construction problem (and have all the stuff
>I own fit inside...)
>The major problem is that the only place I have for the sink is a corner
>of the room.... one side is 1m90 cm (5 3/4 feet) and the other is 1m 70
>cm (5 feet) long. but, if I've a good idea on how to build a rectangular
>plywood sink, I suspect my case to be a builder's nightmare....
>So any help will be greatly appreciated ! Plans, pictures, construction
>details, all will help !
>TIA !
>P.S. I own a set of books on the subject :
>The Kodak "building a home darkroom", "The darkroom handbook" by Dennis
>Curtin and Joe DeMaio, and "build your own home darkroom" by Lista Duren
>and Will McDonald.
>--
I built my own sink, in a corner. It's too late now but tomorrow I'll post
some photos of it and describe the simplicity of its construction. I built
it nearly 20 years ago and it still looks and works like new.
Jim
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
Other related posts:
