[pure-silver] Re: How to build a sink in a corner ?

When I started to enlarge 8x10 negs my sink was too small. It was one of 
those Gemini molded plastic ones 6ft long x 24in wide with a deep end. My 
prints got to be 24x36. The trays would not fit. So I designed a stacked 
system. five trays. deve, rinse, fix, rinse, hypo clear and then another 
wash tray next to the stack. Each tray has a valved drain on the side of 
each tray.Each valve has a hose to the bottom gemini sink.It's pretty easy
to pull a print and slide it into the next tray. Cleans up easy. Stacking 
works great.
Ken

Hi !
The contractor I hired to do the masonry work has just finished my "next
new darkroom" ! So now I face the equipment construction problem (and have
all the stuff I own fit inside...) The major problem is that the only 
place
I have for the sink is a corner of the room.... one side is 1m90 cm (5 3/4
feet) and the other is 1m 70 cm (5 feet) long. but, if I've a good idea on
how to build a rectangular plywood sink, I suspect my case to be a
builder's nightmare.... So any help will be greatly appreciated ! Plans,
pictures, construction details, all will help ! TIA ! P.S. I own a set of
books on the subject : The Kodak "building a home darkroom", "The darkroom
handbook" by Dennis Curtin and Joe DeMaio, and "build your own home
darkroom" by Lista Duren and Will McDonald. -- Ce message est constitu=E9
d'au moins 50 % d'=E9lectrons recycl=E9s. Aucun =E9lectron n'a =E9t=E9 ble=
ss=E9 ou
forc=E9 d'aucune mani=E8re pendant l'=E9criture de ce message. S'il vous p=
la=EEt
aidez nous =E0 conserver nos ressources, recyclez vos =E9lectrons !
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D To unsubscribe from this list, go to
www.freelists.org and logon to your account (the same e-mail address and
password you set-up when you subscribed,) and unsubscribe from there.

=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: