Looks like a config problem, the smtp server cannot be reached. Rein PA0R >Further info. >I sent a mail to the account used for Pskmail and managed to collect the >header but not the body on the first attempt due to other traffic on the >frequency. >On the second attempt a little while ago I received the body of the mail. >Sending again failed, with the same message as the first time, as pasted >below. >To make it clear. Until today, my tests were receiving email only not >sending so it could be an original problem not a new one. >73 Roger G6CKR >On 15/03/11 10:56, Roger G6CKR wrote: >> Sent to list for info. >> -------- Forwarded Message -------- >> From: Roger G6CKR >> To: SA6BQZ Gunnar >> Subject: Re: Test >> Date: Tue, 15 Mar 2011 08:59:53 +0000 >> >> On Mon, 2011-03-14 at 20:52 +0100, SA6BQZ Gunnar wrote: >>> Hi Roger, >>> >>> Thanks again for all the help you have given me. >>> One question: can you send me an email via my server again and send it >>> to (address removed). You told me that the mail routing was >>> working but I tested today from Torsten SA2ATJ but his mailsending >>> made time out so I would be glad if you could do an other test again. >>> >>> Now I am back on 10147 minute 4 and only on the hour. >>> >>> 73 de Gunnar >> Test attempted. >> The result as sent back from your your server. >> >> Error sending mail : Could not open connection: No route to host >> at /usr/local/share/pskmail_server/rflinkserver.pl line 3943. >> >> 73 Roger G6CKR >> >> >> > >