[pskmail] Re: [Fwd: Re: Test]
- From: Per Crusefalk <per@xxxxxxxxxxxx>
- To: pskmail@xxxxxxxxxxxxx
- Date: Tue, 15 Mar 2011 18:58:58 +0100
Did you test this using the smtp test script?
It will show you right away if it works and is a much better way than to
use the server. Question abt the settings, are you sure abt that
nonstandard port? Its usually 25 and not 2525..
73 de Per
SM0RWO
tis 2011-03-15 klockan 18:33 +0100 skrev Gunnar Bulukin:
> Yes Roger, Rein told me that in Perl you cannot write sa6bqz@xxxxxxxxxx
> because it reads it as somthing like a string so thats why I have to put \
> before the @.
> //gunnar
>
> -----Original Message-----
> From: pskmail-bounce@xxxxxxxxxxxxx [mailto:pskmail-bounce@xxxxxxxxxxxxx] On
> Behalf Of G6CKR
> Sent: Tuesday, March 15, 2011 6:21 PM
> To: pskmail@xxxxxxxxxxxxx
> Subject: [pskmail] Re: [Fwd: Re: Test]
>
> Is that \ correct in the user = line it looks odd to me.
> 73 Roger
> On 15/03/11 17:00, Gunnar Bulukin wrote:
> > Hi Rein,
> >
> > I am looking at the configuring for mail in pskmailrc.pl and I can not
> > understand what is wrong!
> > $relay = "send.one.com";
> > $smtpauthlevel = 1; ?
> > $smtptlsuser = "sa6bqz\@bulukin.se";
> > $smtptlspass = "password";
> > $smtptlsport = 2525; ?
> >
> > All according to settings from one.com
> > http://www.one.com/en/support/guide/mail/setting-up-outlook
> >
> > What am I doing wrong??
> >
> > 73 de Gunnar
> >
> > -----Original Message-----
> > From: pskmail-bounce@xxxxxxxxxxxxx
> > [mailto:pskmail-bounce@xxxxxxxxxxxxx] On Behalf Of Rein Couperus
> > Sent: Tuesday, March 15, 2011 1:04 PM
> > To: pskmail@xxxxxxxxxxxxx
> > Subject: [pskmail] Re: [Fwd: Re: Test]
> >
> >
> > Looks like a config problem, the smtp server cannot be reached.
> >
> > Rein PA0R
> >
> >> Further info.
> >> I sent a mail to the account used for Pskmail and managed to collect
> >> the header but not the body on the first attempt due to other traffic
> >> on the frequency.
> >> On the second attempt a little while ago I received the body of the mail.
> >> Sending again failed, with the same message as the first time, as
> >> pasted below.
> >> To make it clear. Until today, my tests were receiving email only not
> >> sending so it could be an original problem not a new one.
> >> 73 Roger G6CKR
> >> On 15/03/11 10:56, Roger G6CKR wrote:
> >>> Sent to list for info.
> >>> -------- Forwarded Message --------
> >>> From: Roger G6CKR
> >>> To: SA6BQZ Gunnar
> >>> Subject: Re: Test
> >>> Date: Tue, 15 Mar 2011 08:59:53 +0000
> >>>
> >>> On Mon, 2011-03-14 at 20:52 +0100, SA6BQZ Gunnar wrote:
> >>>> Hi Roger,
> >>>>
> >>>> Thanks again for all the help you have given me.
> >>>> One question: can you send me an email via my server again and send
> >>>> it to (address removed). You told me that the mail routing was
> >>>> working but I tested today from Torsten SA2ATJ but his mailsending
> >>>> made time out so I would be glad if you could do an other test again.
> >>>>
> >>>> Now I am back on 10147 minute 4 and only on the hour.
> >>>>
> >>>> 73 de Gunnar
> >>> Test attempted.
> >>> The result as sent back from your your server.
> >>>
> >>> Error sending mail : Could not open connection: No route to host at
> >>> /usr/local/share/pskmail_server/rflinkserver.pl line 3943.
> >>>
> >>> 73 Roger G6CKR
> >>>
> >>>
> >>>
> >>
> >>
> >
> >
>
>
Other related posts:
