Thanks! //Gunnar -----Original Message----- From: pskmail-bounce@xxxxxxxxxxxxx [mailto:pskmail-bounce@xxxxxxxxxxxxx] On Behalf Of G6CKR Sent: Tuesday, March 15, 2011 10:37 PM To: pskmail@xxxxxxxxxxxxx Subject: [pskmail] Re: [Fwd: Re: Test] I still have the mail ready to send will retry tomorrow. 73 Roger On 15/03/11 21:25, Gunnar Bulukin wrote: > That explains it!! Changed over to Gmail. > > Torsten, well when we were testing again tonight after he did some > adjustments accordingly to your mailadvises he probably managed to > push/set some buttons/settings wrong because now nothing is working!! > He was going to contact you again but not until Thursday he did not > want to disturb you;-) His son was going to help him get things right again tomorrow. > > My server was replying directly to a ping from IS0GRB-3 if I > understand the text right "QSL IS0GRB-3 de SA6BQZ" or am I > understanding wrong? > Regarding my servers S/N maybe I have to check my VFO settings again > if you think that that might be the problem. > > By the way, on pskmail.it can SA6BQZ be put on the map? > > 73 de Gunnar > SA6BQZ > PS It's a long way to Tipperary!! > > -----Original Message----- > From: pskmail-bounce@xxxxxxxxxxxxx > [mailto:pskmail-bounce@xxxxxxxxxxxxx] On Behalf Of Pär Crusefalk > Sent: Tuesday, March 15, 2011 8:50 PM > To: pskmail@xxxxxxxxxxxxx > Subject: [pskmail] Re: [Fwd: Re: Test] > > Well, that nonstandard port for plain auth is an issue I have to work > around. It will not work as is, actually according to cpan Net::SMTP > doesn't even support a non standard port. I will look into it to see > if I can do that some other way but I have to rewrite sub send_mail in > rflinkserver.pl for it to work. So, until you see a new server version > it will not work. I suggest you use gmail for smtp for a while. > > Regarding Torsten, how is he hearing you? Sounds like the S/N from the > server is not that good? > > 73 de Per > SM0RWO > > > 2011-03-15 20:20, Gunnar Bulukin skrev: >> SA6BQZ ready for mailtest again;-) >> 73 de Gunnar >> >> -----Original Message----- >> From: pskmail-bounce@xxxxxxxxxxxxx >> [mailto:pskmail-bounce@xxxxxxxxxxxxx] On Behalf Of Per Crusefalk >> Sent: Tuesday, March 15, 2011 6:59 PM >> To: pskmail@xxxxxxxxxxxxx >> Subject: [pskmail] Re: [Fwd: Re: Test] >> >> Did you test this using the smtp test script? >> It will show you right away if it works and is a much better way than >> to use the server. Question abt the settings, are you sure abt that >> nonstandard port? Its usually 25 and not 2525.. >> >> 73 de Per >> SM0RWO >> >> >> tis 2011-03-15 klockan 18:33 +0100 skrev Gunnar Bulukin: >>> Yes Roger, Rein told me that in Perl you cannot write >>> sa6bqz@xxxxxxxxxx because it reads it as somthing like a string so >>> thats why I have to put \ before the @. >>> //gunnar >>> >>> -----Original Message----- >>> From: pskmail-bounce@xxxxxxxxxxxxx >>> [mailto:pskmail-bounce@xxxxxxxxxxxxx] On Behalf Of G6CKR >>> Sent: Tuesday, March 15, 2011 6:21 PM >>> To: pskmail@xxxxxxxxxxxxx >>> Subject: [pskmail] Re: [Fwd: Re: Test] >>> >>> Is that \ correct in the user = line it looks odd to me. >>> 73 Roger >>> On 15/03/11 17:00, Gunnar Bulukin wrote: >>>> Hi Rein, >>>> >>>> I am looking at the configuring for mail in pskmailrc.pl and I can >>>> not understand what is wrong! >>>> $relay = "send.one.com"; >>>> $smtpauthlevel = 1; ? >>>> $smtptlsuser = "sa6bqz\@bulukin.se"; $smtptlspass = "password"; >>>> $smtptlsport = 2525; ? >>>> >>>> All according to settings from one.com >>>> http://www.one.com/en/support/guide/mail/setting-up-outlook >>>> >>>> What am I doing wrong?? >>>> >>>> 73 de Gunnar >>>> >>>> -----Original Message----- >>>> From: pskmail-bounce@xxxxxxxxxxxxx >>>> [mailto:pskmail-bounce@xxxxxxxxxxxxx] On Behalf Of Rein Couperus >>>> Sent: Tuesday, March 15, 2011 1:04 PM >>>> To: pskmail@xxxxxxxxxxxxx >>>> Subject: [pskmail] Re: [Fwd: Re: Test] >>>> >>>> >>>> Looks like a config problem, the smtp server cannot be reached. >>>> >>>> Rein PA0R >>>> >>>>> Further info. >>>>> I sent a mail to the account used for Pskmail and managed to >>>>> collect the header but not the body on the first attempt due to >>>>> other traffic on the frequency. >>>>> On the second attempt a little while ago I received the body of >>>>> the >> mail. >>>>> Sending again failed, with the same message as the first time, as >>>>> pasted below. >>>>> To make it clear. Until today, my tests were receiving email only >>>>> not sending so it could be an original problem not a new one. >>>>> 73 Roger G6CKR >>>>> On 15/03/11 10:56, Roger G6CKR wrote: >>>>>> Sent to list for info. >>>>>> -------- Forwarded Message -------- >>>>>> From: Roger G6CKR >>>>>> To: SA6BQZ Gunnar >>>>>> Subject: Re: Test >>>>>> Date: Tue, 15 Mar 2011 08:59:53 +0000 >>>>>> >>>>>> On Mon, 2011-03-14 at 20:52 +0100, SA6BQZ Gunnar wrote: >>>>>>> Hi Roger, >>>>>>> >>>>>>> Thanks again for all the help you have given me. >>>>>>> One question: can you send me an email via my server again and >>>>>>> send it to (address removed). You told me that the mail routing >>>>>>> was working but I tested today from Torsten SA2ATJ but his >>>>>>> mailsending made time out so I would be glad if you could do an >>>>>>> other >> test again. >>>>>>> >>>>>>> Now I am back on 10147 minute 4 and only on the hour. >>>>>>> >>>>>>> 73 de Gunnar >>>>>> Test attempted. >>>>>> The result as sent back from your your server. >>>>>> >>>>>> Error sending mail : Could not open connection: No route to host >>>>>> at /usr/local/share/pskmail_server/rflinkserver.pl line 3943. >>>>>> >>>>>> 73 Roger G6CKR >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> > >