Yes Roger, Rein told me that in Perl you cannot write sa6bqz@xxxxxxxxxx because it reads it as somthing like a string so thats why I have to put \ before the @. //gunnar -----Original Message----- From: pskmail-bounce@xxxxxxxxxxxxx [mailto:pskmail-bounce@xxxxxxxxxxxxx] On Behalf Of G6CKR Sent: Tuesday, March 15, 2011 6:21 PM To: pskmail@xxxxxxxxxxxxx Subject: [pskmail] Re: [Fwd: Re: Test] Is that \ correct in the user = line it looks odd to me. 73 Roger On 15/03/11 17:00, Gunnar Bulukin wrote: > Hi Rein, > > I am looking at the configuring for mail in pskmailrc.pl and I can not > understand what is wrong! > $relay = "send.one.com"; > $smtpauthlevel = 1; ? > $smtptlsuser = "sa6bqz\@bulukin.se"; > $smtptlspass = "password"; > $smtptlsport = 2525; ? > > All according to settings from one.com > http://www.one.com/en/support/guide/mail/setting-up-outlook > > What am I doing wrong?? > > 73 de Gunnar > > -----Original Message----- > From: pskmail-bounce@xxxxxxxxxxxxx > [mailto:pskmail-bounce@xxxxxxxxxxxxx] On Behalf Of Rein Couperus > Sent: Tuesday, March 15, 2011 1:04 PM > To: pskmail@xxxxxxxxxxxxx > Subject: [pskmail] Re: [Fwd: Re: Test] > > > Looks like a config problem, the smtp server cannot be reached. > > Rein PA0R > >> Further info. >> I sent a mail to the account used for Pskmail and managed to collect >> the header but not the body on the first attempt due to other traffic >> on the frequency. >> On the second attempt a little while ago I received the body of the mail. >> Sending again failed, with the same message as the first time, as >> pasted below. >> To make it clear. Until today, my tests were receiving email only not >> sending so it could be an original problem not a new one. >> 73 Roger G6CKR >> On 15/03/11 10:56, Roger G6CKR wrote: >>> Sent to list for info. >>> -------- Forwarded Message -------- >>> From: Roger G6CKR >>> To: SA6BQZ Gunnar >>> Subject: Re: Test >>> Date: Tue, 15 Mar 2011 08:59:53 +0000 >>> >>> On Mon, 2011-03-14 at 20:52 +0100, SA6BQZ Gunnar wrote: >>>> Hi Roger, >>>> >>>> Thanks again for all the help you have given me. >>>> One question: can you send me an email via my server again and send >>>> it to (address removed). You told me that the mail routing was >>>> working but I tested today from Torsten SA2ATJ but his mailsending >>>> made time out so I would be glad if you could do an other test again. >>>> >>>> Now I am back on 10147 minute 4 and only on the hour. >>>> >>>> 73 de Gunnar >>> Test attempted. >>> The result as sent back from your your server. >>> >>> Error sending mail : Could not open connection: No route to host at >>> /usr/local/share/pskmail_server/rflinkserver.pl line 3943. >>> >>> 73 Roger G6CKR >>> >>> >>> >> >> > >