Thanks V much Zhu My Questions in-laid below preceded by Qs -> Cheers ________________________________ From: zhuchao@xxxxxxxxx [mailto:zhuchao@xxxxxxxxx] If direct io is being used, the difference maybe less. Qs 1 -> What do you mean by "the difference maybe less."? Anyway I don't see any benefit using 1k/4k blocksize. If you want best throughput, go with raw volumes. Have done all tuning on hp kaio setup to maximize os capability? Qs 2 -> Could you share some "tuning on hp kaio setup" please? ________________________________ HP who is partnering the Benchmark states - since Filesystems are being Mounted with Direct I/O therefore 1K F.S. block size is preferred to 8K. ________________________________ From: zhuchao@xxxxxxxxx [mailto:zhuchao@xxxxxxxxx] Of course set to 8k ________________________________ We are in the process of Setting up DB Server for an OLTP Banking Application Benchchmark. HP-UX B.11.31 system device block size(think this is the O.S. block size) = 1K Base page size = 4K. DB_block_size = 8K Should the Filesystem (VXFS) Block Size be set to 1K, 4K or 8K? ... Personally I think it should be 4 K (i.e. Equal to the Page-size) **************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system. ***INFOSYS******** End of Disclaimer ********INFOSYS***