How about the zoom lense control, which has to be able to be done on the fly. Either the cammera would name to have sliders on the side, which might be harder to operate, or longer, and the width of the array is more than that of the camera, so there goes smaller and being able to fit into tighter places. Plus the array is the power drain, and it would necessarily make the camera bulkier/heavier. Nice idea intellectually, but I have reservations about being able to engineer drivers for 144 tactors optics, et al into a package as small as our current camera, and, what about typewriter lenses, and the possibility of drop damage being more likely to a bulkier heavier unit? Nick On Thu, 11 May 2006 07:51:42 -0700, Sherman, Becky wrote: It seems to me that it wouldn't need to be any bigger than the camera. The rollers and camera could be on the bottom, of course, and the array could sit right on top so that as you rolled the camera across, your index finger--or whichever one you use--could be in the array. How does that soulnd?=20 -----Original Message----- From: optacon-l-bounce@xxxxxxxxxxxxx [mailto:optacon-l-bounce@xxxxxxxxxxxxx] On Behalf Of Catherine Thomas Sent: Thursday, May 11, 2006 7:49 AM To: optacon-l@xxxxxxxxxxxxx Subject: How would this work? was a wish list I'm having trouble picturing the logistics of the one-handed Optacon. The only picture I can come up with is that the camera and the array would be one unit so we would only have one piece to hold onto. I think the device would still take two hands to operate because we couldn't track and read with the same hand, could we? The other question: I have trouble fitting the camera into tight places now. If it were somehow bigger because it had the array as a part of it, how could it fit anywhere? This is not a criticism of the idea. I just can't figure out how this works. Catherine ------------------------------------------------------------------------ ------ -Catherine Thomas braille@xxxxxxxxx / ------------------------------------------------------------------------ ------- To unsubscribe at any time, just send a message to: optacon-l-request@xxxxxxxxxxxxx with the word "unsubscribe" (without the quotes) in the message subject. =20 Tell your friends about the list. They can subscribe by sending a message to: optacon-l-request@xxxxxxxxxxxxx with the word "subscribe" (without the quotes) in the message subject. =20 To unsubscribe at any time, just send a message to: optacon-l-request@xxxxxxxxxxxxx with the word "unsubscribe" (without the quotes) in the message subject. Tell your friends about the list. They can subscribe by sending a message to: optacon-l-request@xxxxxxxxxxxxx with the word "subscribe" (without the quotes) in the message subject. To unsubscribe at any time, just send a message to: optacon-l-request@xxxxxxxxxxxxx with the word "unsubscribe" (without the quotes) in the message subject. Tell your friends about the list. They can subscribe by sending a message to: optacon-l-request@xxxxxxxxxxxxx with the word "subscribe" (without the quotes) in the message subject.