[modeleng] St Agnes
- From: "Alan Stepney" <alan@xxxxxxxxxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Wed, 22 Aug 2007 21:48:41 +0100
When I went on the Saturday we were "blesses" with rain.
Hence I only too a few photos.
Roger Mason took some on the Sunday, when the weather was kinder.
Our combined efforts can be seen at:
http://www.alanstepney.info/sa.html
http://www.alanstepney.info/photos/sa070012.html may interest some of you,
particularly the Americans.
http://www.alanstepney.info/photos/sa0273C.html and the one that follows it
are of an engine I havent seen before.
It comprises a vertical 2? cylinder engine on one side, counterbalanced by
the water tank on the other side of the engine. Drive is by a bevel on to
the rear off-side wheel.
Alan Stepney
http://www.alanstepney.info
Model Engineering & steam engine information pages
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
- Follow-Ups:
- [modeleng] Re: St Agnes
- From: Jesse Livingston
- [modeleng] Regulator and dome screws - offical guidelines on materials?
- From: R.L. Roebuck
- [modeleng] Re: St Agnes
- From: Allen Messer
- References:
- [modeleng] Re: Nameplate niggles
- From: Dave Beaman
- [modeleng] Re: 1HP , 24V DC electric motor on ebay for £1
- From: peter . chadwick
- [modeleng] Nameplate niggles
- From: R.L. Roebuck
- [modeleng] Re: Nameplate niggles
- From: Peter Cathcart
- [modeleng] Re: Nameplate niggles
- From: Harry Wade
- [modeleng] Re: Nameplate niggles
- From: Harry Wade
Other related posts:
- » [modeleng] St Agnes
- » [modeleng] Re: St Agnes
- » [modeleng] Re: St Agnes
- » [modeleng] Re: St Agnes
- » [modeleng] St Agnes
- » [modeleng] Re: St Agnes
- » [modeleng] Re: St Agnes
- » [modeleng] St Agnes
- » [modeleng] St Agnes
- » [modeleng] Re: St Agnes
- » [modeleng] Re: St Agnes
- » [modeleng] Re: St Agnes
- » [modeleng] Re: St Agnes
- » [modeleng] Re: St Agnes
- » [modeleng] Re: St Agnes
- » [modeleng] Re: St Agnes
- » [modeleng] Re: St Agnes
- » [modeleng] Re: St Agnes
- » [modeleng] Re: St Agnes
- » [modeleng] Re: St Agnes
- » [modeleng] Re: St Agnes
- » [modeleng] Re: St Agnes
- » [modeleng] Re: St Agnes
- » [modeleng] Re: St Agnes
- » [modeleng] Re: St Agnes
- » [modeleng] St Agnes - Alan Stepney
- » [modeleng] Re: St Agnes - Clif Walker
- » [modeleng] Re: St Agnes - Alan Stepney
- » [modeleng] Re: St Agnes - kenny
- » [modeleng] Re: St Agnes - Clif Walker
- » [modeleng] Re: St Agnes - Alan Stepney
- » [modeleng] Re: St Agnes - Clif Walker
- [modeleng] Re: St Agnes
- From: Jesse Livingston
- [modeleng] Regulator and dome screws - offical guidelines on materials?
- From: R.L. Roebuck
- [modeleng] Re: St Agnes
- From: Allen Messer
- [modeleng] Re: Nameplate niggles
- From: Dave Beaman
- [modeleng] Re: 1HP , 24V DC electric motor on ebay for £1
- From: peter . chadwick
- [modeleng] Nameplate niggles
- From: R.L. Roebuck
- [modeleng] Re: Nameplate niggles
- From: Peter Cathcart
- [modeleng] Re: Nameplate niggles
- From: Harry Wade
- [modeleng] Re: Nameplate niggles
- From: Harry Wade