[modeleng] Re: Nameplate niggles

From: Harry Wade <hww@xxxxxxxx>
To: modeleng@xxxxxxxxxxxxx
Date: Tue, 21 Aug 2007 16:42:46 -0500

At 10:30 PM 8/21/07 +0100, you wrote:
>Bil Hall is cheaper and better quality - Dave

Dave,
      Cheaper is easily understood, but what about Bills' quality can be
measureably better?  I've examined D. Carney's plates and don't find much
room for improvement, unless her quality has slipped badly in the last few
years.

Regards,
Harry

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Follow-Ups:

[modeleng] Re: Nameplate niggles
From: Dave Beaman

References:
- [modeleng] Re: 1HP , 24V DC electric motor on ebay for £1
  - From: peter . chadwick
- [modeleng] Nameplate niggles
  - From: R.L. Roebuck
- [modeleng] Re: Nameplate niggles
  - From: Peter Cathcart
- [modeleng] Re: Nameplate niggles
  - From: Dave Beaman

[modeleng] Re: Nameplate niggles

Other related posts: