HI Alan, Now it's the Bristol ME show next week end. It's all go at the moment. Clif ----- Original Message ----- From: "Alan Stepney" <alan@xxxxxxxxxxxxxxxx> To: <modeleng@xxxxxxxxxxxxx> Sent: Sunday, August 16, 2009 9:09 PM Subject: [modeleng] Re: St Agnes > Clif, > Of course the weather wasnt good: I was going! lol > Roger sent me a photo showing glorious blue skies and sunshine, so I drive > down through rain and mist, and although the weather wasnt too bad on > Saturday, it could have been better. > > Nevertheless, a good show and well worth seeing. > > I'm glad to here that the Helston project is making progress. > I used to have relatives in Helston and spent a lot of time there. > > Alan > > > > ----- Original Message ----- > From: "Clif Walker" <clif.gwr@xxxxxxxxxxxx> > To: <modeleng@xxxxxxxxxxxxx> > Sent: Sunday, August 16, 2009 8:40 PM > Subject: [modeleng] Re: St Agnes > > > Hi Alan and All, > > As the weather wasnt so good I didnt go to St Agnes on Saturday but spent > my > time otherwise engaged shunting stock down on our embyo railway at Helston > Preservation Society. > Went to St Agnes today ( Sunday ) as it was a drier day, I thought that it > was a good show. > Interesting that they are moving to the Stithians Show ground. > It will be a better place for them as they will be able to play more > often. > The two snags are, that I dont think that the ground area is so big which > may limit the show size and parking and access to the place will be a > swine. It's bad enough now when the Stithians show takes place as the main > road to Falmouth backs up a couple of miles with traffic before the turn > off > road to the Stithians ground. > > We shall see. > Regards > > Clif > > MODEL ENGINEERING DISCUSSION LIST. > > To UNSUBSCRIBE from this list, send a blank email to, > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject > line. > > MODEL ENGINEERING DISCUSSION LIST. > > To UNSUBSCRIBE from this list, send a blank email to, > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject > line. > MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.