[jhb] Re: CH Yoke Query
- From: "Fossil" <fossil@xxxxxxx>
- To: <jhb@xxxxxxxxxxxxx>
- Date: Sat, 18 Jul 2009 16:31:15 +0100
Have you set your null zone too tight?
bones
bones@xxxxxxx
-----Original Message-----
From: jhb-bounce@xxxxxxxxxxxxx [mailto:jhb-bounce@xxxxxxxxxxxxx] On Behalf
Of Gerry Winskill
Sent: 18 July 2009 08:58
To: JHB Restricted
Subject: [jhb] CH Yoke Query
Another day and another problem! This time it's my CH USB Yoke.
For about a week now I've found that leaving the yoke hands free results
in the aircraft slowly banking and turning to the right. It happens with
a variety of aircraft, so it's not aircraft.cfg induced.
I've allocated a couple of keys to aileron trim but they have no effect.
I've recalibrated several times. No effect.
I've recalibrated, pressing a button to indicate the yoke is centred,
whilst actually holding it in the approx position needed for level
flight, in the current situation.
I'm beginning to suspect the inabillity to trim, or calibrate, out
points to the Yoke internals as the culprit.
I seem to recall someone on the list trying to open up the yoke, with
explosive results! So, the only idea I have is to try squirting
electrical cleaner into it.
Anyone any ideas please? I've had the yoke since the USB Yoke first came
out, so perhaps it's just knackered!
Gerry Winskill
Other related posts:
