[jawsscripts] Re: Frames
- From: "Steven Hicks \(HICKSSM\)" <Steven.HicksSM@xxxxxxxxxxxxx>
- To: <jawsscripts@xxxxxxxxxxxxx>
- Date: Thu, 10 Sep 2009 08:06:05 +0100
Nice one thanks again.
----- Original Message -----
From: "Geoff Chapman" <gch@xxxxxxxxxxxxxxxx>
To: <jawsscripts@xxxxxxxxxxxxx>
Sent: Thursday, September 10, 2009 12:52 AM
Subject: [jawsscripts] Re: Frames
> hi Steven.
>
> now firstly, did you eventually see my post some weeks back on this whole
> deal, and were you able to follow it easily? re assigning actions to
> events,
> and the on/off status of each event, in the list of various events,
> that should be now listed in the events tab of your frame
> properties etc?
>
> So to me, it sounds like you have got an OnText event, assigned to launch
> your script like you want. but, that another event still also assigned to
> trigger upon the Text Changing,
> is also speaking the actual frame contents as well now, which you don't
> want. is that right?
>
> This to me suggests, that you've still got the original OnText event whose
> action is still assigned to SayFrame,
> that gets assigned as a matter of course when you first assign the frame's
> purpose in the wizard, turned on, or present, or both actually, as one of
> the multiple events you can have various frame Triggers assigned to.
>
> So, you'd go into frame Viewer, tab till you find the frame in question,
> hit
> alt+Enter, control+Tab twice till you reach the events tab, then you
> should
> be focused on the list of various events, with the word On, or Off, at the
> front of each one, which should also detail what action each one has been
> assigned.
> So find the one that might say something like,
> On, onFrameKey sayFrame, blah blah blah.
> or,
> on, OnText, SayFrame, blah blah blah.
>
> just either hit spaceBar to turn them off, if you wanna leave them there
> in
> case you wannem back on for further debugging purposes later, or you can
> permanently delete them if you want by hitting delete.
>
> you can even change the order of the events in here using the move event
> up
> or down buttons etc. very powerful!
>
> hth.
>
>
> ----- Original Message -----
> From: "Steven Hicks (HICKSSM)" <Steven.HicksSM@xxxxxxxxxxxxx>
> To: <jawsscripts@xxxxxxxxxxxxx>
> Sent: Wednesday, September 09, 2009 11:41 PM
> Subject: [jawsscripts] Frames
>
>
>> Hi friends,
>> i have a frame that monitors a line on the screen then if a number
> changes, it executes a script.
>> when the text on the screen changes, it speaks the frame at the moment
>> and
> I would like to turn this off so it says nothing but just launches the
> script.
>> I have checked the frame properties but can't seem to find out the
>> action,
> can anyone point me in the correct location please?
>> i seem to remember that when i set up the script through the Wizzard,
> there was a selection of actions and one of them is screen echo or
> something
> and I can't find that now in the Frame viewer?
>>
>> --------------------------------------------------------------------------
> ---------------
>> The information in this e-mail and any attachments is
>> confidential and is intended for the attention and use of the
>> named addressee(s). It must not be disclosed to any other
>> person without our authority. If you are not the intended
>> recipient, or a person responsible for delivering it to
>> the intended recipient or are aware that this e-mail has been
>> sent to you in error, you are not authorised to and must not
>> disclose, copy, distribute, or retain this message or any part of it.
>>
>> We sweep all outgoing messages for the presence of computer
>> viruses. However, we cannot accept any responsibility for any
>> loss or damage to your systems due to viruses or malicious
>> code not detected.
>>
>> The statements and opinions expressed in this message are
>> those of the author and do not necessarily reflect those of the
>> organisations within the Cornwall & Isles of Scilly Health
>> Community.
>>
>> This email may be disclosed under the Freedom of Information
>> Act 2000 or the Environmental Information Regulations 2004.
>> --------------------------------------------------------------------------
> ---------------
>>
>> __________
>> Visit and contribute to The JAWS Script Repository http://jawsscripts.com
>>
>> View the list's information and change your settings at
>> //www.freelists.org/list/jawsscripts
>>
>
> __________
> Visit and contribute to The JAWS Script Repository http://jawsscripts.com
>
> View the list's information and change your settings at
> //www.freelists.org/list/jawsscripts
>
-----------------------------------------------------------------------------------------
The information in this e-mail and any attachments is
confidential and is intended for the attention and use of the
named addressee(s). It must not be disclosed to any other
person without our authority. If you are not the intended
recipient, or a person responsible for delivering it to
the intended recipient or are aware that this e-mail has been
sent to you in error, you are not authorised to and must not
disclose, copy, distribute, or retain this message or any part of it.
We sweep all outgoing messages for the presence of computer
viruses. However, we cannot accept any responsibility for any
loss or damage to your systems due to viruses or malicious
code not detected.
The statements and opinions expressed in this message are
those of the author and do not necessarily reflect those of the
organisations within the Cornwall & Isles of Scilly Health
Community.
This email may be disclosed under the Freedom of Information
Act 2000 or the Environmental Information Regulations 2004.
-----------------------------------------------------------------------------------------
__________
Visit and contribute to The JAWS Script Repository http://jawsscripts.com
View the list's information and change your settings at
//www.freelists.org/list/jawsscripts
Other related posts:
