In article <c36b52974e.eddie@xxxxxxxxxxxxxxxxxxxxxxxxx>, Eddie Lord <riscos@xxxxxxxxxxxxxxxxxxx> wrote: > > I normally only switch the scanner on just before I want to use it, > > and have no problems, but occasionally if I use it and then do > > something else, it seems to 'go to sleep'. If I realise, and use > > USBKick before trying to use it, it's normally OK, but if I try to use > > it in this state, DPlngScan normally hangs on the non-response, and > > from that state, there seems no way back to normality other than a > > re-boot. USBKick wakes up the scanner, and I can stop and re-load > > DPlngScan, but the problem remains embedded. > This is the same situation I have here. It has only been a problem > since upgrading to the new OS 5.12 and with Epson 2400 photo. I only > has USB 1 before the upgrade. I am still on 5.11, but I have USB2 > Before the upgrade it didn't matter in what order the scanner was > switched on. I thought it had been like this since I bought the scanner (before I got USB2) but I might be mistaken. John -- John Harrison - http://www.jaharrison.me.uk Message sent from a British built Iyonix PC running RISC-OS 5 --- To alter your preferences or leave the group, visit //www.freelists.org/list/iyonix-support Other info via //www.freelists.org/webpage/iyonix-support