[iyonix-support] Re: EtherK not starting up reliably

In message <c3cd1a4f4e.jbwork@xxxxxxxxxx>
          John Ballance <jwb@xxxxxxxxxx> wrote:

> Hi
> 
> In message <18f6f64e4e.peter@xxxxxxxxxxxxxxxxxxxxxxxxx>
>           Peter Bell <peter@xxxxxxxxxxxxxxxxx> wrote:

 [Snip]

> > Okay - fault not currently in evidence, but the 5V reading is 5.08V.
> > What is the typical/lowest reading you would expect to see on new
> > device?
> 
> power supplies as shipped provide 5.04 to 5.07v (stable, and depending
> on DMM) under almost all load conditions. A reading of less than 5.00
> indicates a psu that has ceased to behave in its intended manner....

Okay - my other DMM reads 5.07V, so it looks as though I don't have any
problems with the PSU :)

-- 
Peter Bell - peter@xxxxxxxxxxxxxxxxx
---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: