[PCB_FORUM] Re: [RMX:#] drill quit working.
- From: "Moore, Blake" <Blake.Moore@xxxxxxxxxx>
- To: "icu-pcb-forum@xxxxxxxxxxxxx" <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Wed, 29 Aug 2012 11:14:16 -0400
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of sjchar3@xxxxxxxxxxxx
Sent: Wednesday, August 29, 2012 11:02 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: [RMX:#] drill quit working.
Im using allegro 16.3. At the bottom of the GUI I see "nctape_full". I brought
in the NClegend and the vias were updated, but i don't have a "DRL" file.
Thanks for all replies.
-----Original Message-----
From: TEYSSIER Jean-Charles
<jcteyssier@xxxxxxxxxxxxxxx<mailto:jcteyssier@xxxxxxxxxxxxxxx>>
To: icu-pcb-forum
<icu-pcb-forum@xxxxxxxxxxxxx<mailto:icu-pcb-forum@xxxxxxxxxxxxx>>
Sent: Wed, Aug 29, 2012 6:10 am
Subject: [PCB_FORUM] Re: [RMX:#] drill quit working.
Some cheks :
- no space in directory names.
- Space disk left ?
- No space in temp directory name
Jean-Charles TEYSSIER
________________________________
De :
icu-pcb-forum-bounce@xxxxxxxxxxxxx<mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx>
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx<mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx?>]
De la part de Matija Golar
Envoyé : mercredi 29 août 2012 15:03
À : icu-pcb-forum@xxxxxxxxxxxxx<mailto:icu-pcb-forum@xxxxxxxxxxxxx>
Objet : [PCB_FORUM] Re: [RMX:#] drill quit working.
i think it is more trivial...
try entering ncdrill config and change 1 parameter, so config file gets
rewritten, then start drill again
i remember seeing something like this once...
regards,
Matija
On 29.8.2012 14:55, isco catanyag wrote:
Try to install latest hotfix.
________________________________
From: TEYSSIER Jean-Charles
<jcteyssier@xxxxxxxxxxxxxxx><mailto:jcteyssier@xxxxxxxxxxxxxxx>
To: icu-pcb-forum@xxxxxxxxxxxxx<mailto:icu-pcb-forum@xxxxxxxxxxxxx>
Sent: Wednesday, August 29, 2012 2:09 PM
Subject: [PCB_FORUM] Re: [RMX:#] drill quit working.
Hi sam,
Which allegro version and which symptoms ?
Jean-Charles TEYSSIER
________________________________
De :
icu-pcb-forum-bounce@xxxxxxxxxxxxx<mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx>
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] De la part de
sjchar3@xxxxxxxxxxxx<mailto:sjchar3@xxxxxxxxxxxx>
Envoyé : mercredi 29 août 2012 01:29
À : icu-pcb-forum@xxxxxxxxxxxxx<mailto:icu-pcb-forum@xxxxxxxxxxxxx>
Objet : [RMX:#] [PCB_FORUM] drill quit working.
Group:
Not sure what happened but the drill functions isn't working anymore.
Any help would be appreciated.
Thanks sam
Other related posts:
