Mike, Here's how I copy a shape: - On the menu at top, click Shape -> Select Shape or Void - Click on the shape to be copied (it highlights) - On the highlighted shape, RMB -> Copy (copies to the layer the shape is on), OR (this one is great!) RMB -> Copy to Layers (you can then copy the highlighted shape to just one or many layers at once! Good luck, Gary E. MacIndoe Advanced Micro Devices PCB Design Engineer Longmont, Colorado amd.com gary.macindoe@xxxxxxx -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of gnieski_mike@xxxxxxx Sent: Friday, February 02, 2007 12:53 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] I seem to remember seeing a copy shape command instead of z-copy but cant seem to find it in my menus.....does anyone happen to know it? thanks, Mike ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------