[ibis-macro] Re: IBIS-to-AMS script update
- From: "Paul Fernando" <prfernan@xxxxxxxx>
- To: ibis-macro@xxxxxxxxxxxxx
- Date: Wed, 8 Feb 2006 14:51:30 -0500 (EST)
Arpad,
They are all minor changes.
I'll have them fixed before the end of the day.
Thanks,
Paul
On Wed, February 8, 2006 2:11 pm, Muranyi, Arpad wrote:
> Paul,
>
> I tried the Verilog portion of your script today
> and found a couple of minor things.
>
> 1) When the IBIS file doesn't have something,
> don't print it out in the .dat file. For example,
> in a 3-state buffer there are no Vinh and Vinl
> parameters, yet you printed them in the .dat
> file with zero values. This may apply to all
> other parameters, and the VHDL portion too, but
> I didn't test it. The only exception to this
> rule would be the voltage reference parameters,
> which I discussed in an earlier reply.
>
> 2) You printed three `define statements in the
> .dat file. While it can be done that way also,
> I would prefer just to use one at the beginning.
> If we have multiple definitions, the netlist will
> have to use the same number of calls in the
> parameter passing section, and that will begin
> to look too busy. The whole point of doing it
> with this .dat file and macro definition was to
> reduce the amount of typing on the netlist.
>
> 3) Cosmetics: You could put an extra "blank"
> line between the various IV and Vt tables to make
> it somewhat easier to read (in case someone needs
> to look at it with an editor).
>
> I didn't see a response from you to the suggestions
> I made on the voltage reference parameters and the
> association of the waveforms with r1, r2, f1, f2.
> Do you think you can implement it?
>
> Thanks,
>
> Arpad
> =================================================---------------------------------------------------------------------
> IBIS Macro website: http://www.sisoft.com/ibis-macro
> IBIS Macro archives: //www.freelists.org/archives/ibis-macro
> To unsubscribe send an email:
> To: ibis-macro-request@xxxxxxxxxxxxx
> Subject: unsubscribe
>
>
---------------------------------------------------------------------
IBIS Macro website: http://www.sisoft.com/ibis-macro
IBIS Macro archives: //www.freelists.org/archives/ibis-macro
To unsubscribe send an email:
To: ibis-macro-request@xxxxxxxxxxxxx
Subject: unsubscribe
Other related posts:
